Rehau PVC edgebanding 301021-342 provides a PVC edge banding strip for finishing exposed panel edges, so cabinet and furniture projects use a defined edge profile instead of raw board edges. The 15/16 inch width covers standard panel thickness with some margin, which helps installers trim flush without exposing core material. The 3mm thickness creates a substantial PVC edge, which supports a solid profile at corners and along high-touch edges. The FLEX designation identifies a flexible PVC construction, which helps the banding follow typical panel runs and gentle transitions during installation. The CP41299 reference ties this banding to a specific embossed lacquer style, which keeps visual appearance consistent across matching components. The 300FT length per roll supports longer runs and repeat jobs, which reduces roll changes during production work and keeps edge appearance uniform across multiple parts.
The 15/16 inch width on this Rehau PVC edgebanding allows installers to position the banding with slight overhang on both sides, which simplifies alignment before trimming. The 3mm thickness gives enough material for flush trimming tools to cut a clean edge without tearing, which helps leave a smooth transition from edge to face. The FLEX PVC construction supports bending along straight panel edges during standard edge banding workflows, which works well with common edge banding equipment designed for PVC strips. The CP41299 embossed lacquer reference defines the surface design, which helps shops reserve this part number when a project calls for that exact look. With 300FT per roll, shops can set up a run and edge band multiple panels in sequence, which helps maintain uniform edge appearance from the first piece to the last.
This Rehau PVC edgebanding, identified as 301021-342, serves as an edge treatment for panels in cabinet and furniture construction, so exposed substrate edges receive a finished PVC strip. The 15/16 inch width offers coverage beyond typical panel thickness, which gives room to center the banding and still have enough overhang for trimming tools. That extra coverage helps installers avoid tight alignment and supports efficient production when parts move quickly through an edgebander. The 3mm thickness forms a noticeable PVC edge, which interacts well with trimming and scraping operations to leave a defined corner. This thickness also supports routing edge details where appropriate, which can help match the edge profile to the overall project style. The FLEX PVC structure matches standard flexible banding behavior, which allows the strip to sit flat along straight panel edges during application.
The CP41299 embossed lacquer reference in the description ties this banding to a particular surface texture and finish system, which helps shops select the same part whenever they repeat a project that specifies that look. That consistency supports visual alignment between panels, doors, and other components edged with this banding. The lacquer reference also indicates the finish type applied to the surface, which affects how the edge presents under typical lighting in finished installations. The 300FT length per roll supplies a continuous run of banding, which supports edging many panels before changing rolls in a production setting. Longer footage helps reduce interruptions at the edgebander, which supports steady throughput. The combination of defined width, 3mm thickness, and specified CP41299 style under the Rehau brand gives shops a repeatable PVC edgebanding option tied to the 301021-342 part number.
Rehau PVC edgebanding 301021-342 uses a 15/16 inch width, which provides coverage beyond typical panel thickness so installers have material to trim for a clean, flush edge.
Rehau PVC edgebanding 301021-342 has a 3mm thickness, which offers enough PVC material for trimming and scraping operations to leave a defined, solid edge profile.
Rehau PVC edgebanding 301021-342 carries a FLEX designation, which indicates a flexible PVC construction that follows straight panel edges during standard banding workflows.
Rehau PVC edgebanding 301021-342 lists CP41299 embossed lacquer, which ties the product to a specific surface texture and finish style for consistent visual appearance.
Rehau PVC edgebanding 301021-342 is supplied in a 300FT roll, which supports edging multiple panels in sequence and reduces changeover time between banding runs.
Rehau PVC edgebanding 301021-342, with 15/16 inch width, 3mm thickness, FLEX construction, and CP41299 lacquer style, aligns with cabinet and furniture panels needing that specific edge look.
The Rehau PVC edgebanding 301021-342 from Wurth Baer Supply combines a 15/16 inch width, 3mm thickness, FLEX PVC construction, and CP41299 embossed lacquer style to support consistent panel edges. For cabinet or furniture work calling for this specific part number, its defined dimensions and 300FT roll length provide a repeatable solution for finishing exposed panel edges with a matching PVC profile.
Sold In: 1 Roll