Rehau PVC edgebanding 301021-344 gives you a defined PVC edge on panel work so exposed board edges are covered and protected during normal use. The edge banding design as an edge banding product means it finishes raw edges on suitable substrates, which keeps projects looking uniform from panel face to edge. The 15/16 inch width provides coverage over typical board thickness with some overhang, so trimming can bring the edge flush for a precise finished line. The 3mm thickness creates a substantial edge profile, which helps the edge read consistently along cabinet doors, drawer fronts, or casework. The FLEX designation in the description signals a flexible PVC construction, so the material can follow straight runs and gentle curves during application. The 300 foot length in the description provides a continuous supply from one roll, which is practical for runs of multiple parts on the same job.
The 15/16 inch width on this Rehau PVC edge banding gives you coverage beyond common panel thickness, so the band overhangs slightly and can be trimmed back for a controlled, flush result. That extra margin helps keep the adhesive area fully supported from edge to edge. The 3mm thickness works as a defined profile at the panel perimeter, so routing or scraping after bonding removes only the excess without losing the intended edge dimension. Because the banding is described as FLEX PVC, it can follow typical cabinet and casework edges without stressing the strip during application, which supports consistent glue-line contact along the entire length.
This Rehau PVC edgebanding, identified under edge banding in the product class, is suited to covering raw edges on panel-based construction where a PVC edge is desired. The 15/16 inch width stated in the description allows use on panels that are close to that size in thickness, leaving a slight overhang on each side so trimming tools can flush the band to the faces. That size relationship fits typical casework parts like doors, drawer fronts, and vertical gables built from sheet goods. The 3mm thickness creates a defined PVC border around these parts, so the edge visually frames the panel surface and maintains a consistent band height along all edges of a run.
The PVC material specified in the product name works as a solid synthetic facing over the exposed core of suitable sheet materials, so the transition from face to edge presents a continuous surface once the banding is bonded and trimmed. With FLEX noted in the SAP description, the edgebanding has a flexible character that supports guiding it along cabinet-length edges in a controlled pass. That helps maintain alignment as you bring the band into contact and work along the length, which is useful in a shop workflow focused on repeatable edges across multiple similar parts.
The 15/16 inch by 3mm size called out in the SAP description sets the working geometry for this Rehau PVC edgebanding, so you can match the band to panel thickness and edge profile expectations at the planning stage. The 3mm thickness provides a noticeable edge depth, so trimming and light profiling preserve a solid band without thinning it to a fragile line as you clean up the edge. That characteristic supports a consistent reveal from one door or panel to the next when the same banding is used across a project.
The 300FT roll length specified in the description gives you a single continuous source for long runs, so you can edge many parts from one roll and keep color and texture consistent across the job. Having that footage available in one roll supports batching work, because you can set up an edgebanding station and feed a sequence of components without switching to another roll midway. The FLEX designation signals a flexible PVC strip that can stay seated against the edge as you work down long pieces, so glue-line contact remains even while the band conforms to normal straight cabinet parts or modest curves within the strip's capability.
The Rehau PVC edgebanding 301021-344 is described as 15/16 inch wide by 3mm thick, so it provides slight overhang for trimming and a defined 3mm edge profile once the excess is removed.
The FLEX wording in the SAP description indicates a flexible PVC construction, so the strip can follow straight or gently contoured panel edges while maintaining edge contact during application.
The Rehau 301021-344 PVC edgebanding is listed as 300FT in the description, so a single roll supports edging multiple components or longer production runs from one continuous length.
The Rehau 301021-344 edge banding is identified as PVC, so it creates a solid synthetic edging layer over the panel core for a uniform edge surface after trimming and finishing operations.
The 3mm thickness provides a substantial edge profile, so doors and panels gain a defined PVC border that stays consistent along edges once trimming brings the band flush to the faces.
The 15/16 inch width gives coverage across the panel edge with extra material on both sides, so trimming tools can cut the overhang back to a precise, flush edge without exposing the core.
The Rehau PVC edgebanding 301021-344 combines a 15/16 inch width, 3mm thickness, FLEX construction, and 300FT roll length, so it is suited to panel-based cabinet and casework projects needing a consistent PVC edge. Those dimensions support trimming to a clean line, building a defined edge profile, and running multiple parts from one continuous strip. For shop work that depends on repeatable results across many doors or panels, this edge banding offers a defined size and format you can plan into your next production run.
Sold In: 1 Roll