Rehau PVC edgebanding 301021-347 provides a PVC edge treatment that covers exposed board edges so cabinet and furniture projects present a finished, uniform line. The 15/16 inch width spans standard panel thicknesses with some overhang, giving room to trim flush without exposing the substrate. The 3mm thickness adds a substantial edge profile that can handle everyday contact on doors, drawer fronts, and casework edges. FLEX in the description identifies a flexible PVC construction that follows panel runs smoothly, which helps when working across longer edges. The CP40826 reference identifies a specific color or pattern within the Rehau system, supporting visual consistency across multiple components on the same job. The 300FT length designation signals a continuous run suitable for production or multi-cabinet projects, allowing long edges to be covered in one pass and reducing seams along visible runs.
The 15/16 x 3mm sizing on this Rehau PVC edgebanding, 301021-347, sets both width and thickness before trimming so tooling can be planned around a consistent profile. The 300FT description defines a single long length that can be processed with edgebanders or manual methods while relying on uninterrupted material. FLEX construction allows the PVC strip to sit flat against panel edges under typical pressing methods, which supports adhesive activation and bond formation along straight cabinet or furniture components.
This Rehau PVC edgebanding, identified as 301021-347, belongs in edge treatment workflows where a 15/16 inch wide, 3mm thick profile matches the design intent of cabinets, casework, or furniture parts. The edge banding format aligns with edgebanding processes that apply PVC to exposed board edges, so components such as doors, drawer fronts, shelves, and cabinet sides can share a consistent edge profile. The FLEX notation signals a flexible PVC structure, which suits straight runs on panels where continuous contact along the glue line is needed. The specific CP40826 reference ties this roll to a particular Rehau appearance, valuable when components on a project use the same code to maintain color and pattern continuity from part to part.
The defined 15/16 inch width on this PVC edge banding, 301021-347, gives installers predictable overhang beyond common substrate thicknesses, which simplifies setting trimmers and achieves a repeatable flush edge on multiple pieces. The 3mm thickness keeps the edge profile uniform from one part to the next, supporting consistent reveals on matched fronts and panels. Labeling this material as FLEX PVC indicates behavior suited to standard edgebanding equipment or manual application, contributing to a controlled bond line along straight edges. The CP40826 and 301021-347 identifiers create a traceable combination for shops that document materials, so reorders match earlier work without reselecting color or finish. The 300FT length supports production flow by allowing many parts to be processed from one continuous roll, reducing changeovers during a run.
Rehau PVC edgebanding 301021-347 is specified as 15/16 x 3mm, providing width coverage for typical panel thicknesses and a 3mm edge profile for a thicker finished appearance.
The 301021-347 edgebanding is PVC, giving a uniform synthetic edge that supports consistent trimming and finishing along cabinet and furniture components.
Rehau PVC edgebanding 301021-347 is designated at 300FT, providing a long, continuous length suitable for multi-part cabinet or casework runs from a single roll.
This 3mm PVC edgebanding works on exposed board edges for cabinets, furniture, and casework, giving a thicker edge detail that aligns with modern front designs.
FLEX on this Rehau PVC edgebanding indicates a flexible PVC construction that follows straight panel edges while supporting a continuous bond along the length.
The CP40826 and 301021-347 codes identify a specific Rehau PVC edgebanding variant, helping shops match color or design across repeat orders and related components.
The Rehau PVC edgebanding 301021-347 pairs a 15/16 inch width with a 3mm thickness and flexible PVC construction so cabinet and furniture edges gain a consistent, defined profile. With a 300FT length and the CP40826 identifier, this edge banding fits shops that standardize on specific Rehau codes for repeatable color and design across projects. Select this roll when a 3mm PVC edge suits the visual and dimensional requirements of your current run and future reorders.
Sold In: 1 Roll