Rehau PVC edgebanding 301021-350 is a flex PVC edge banding that finishes exposed panel edges so cut substrates present a clean, protected edge in cabinet and furniture builds. The 15/16 inch width covers standard panel thickness with a small overhang, giving room to trim back to a precise flush line. The 3mm thickness adds a solid front edge that helps panels stand up to everyday contact along door and shelf fronts. The CP41178 embossed lacquered surface provides a textured, finished appearance in one step, so the edge visually ties into the panel design. Supplied in a 300 foot length, this edgebanding supports longer runs or multiple jobs from a single part number, which helps maintain visual consistency across a project. As part of Rehau edge banding, this PVC profile is engineered specifically as an edge treatment in woodworking and cabinet applications.
This Rehau PVC edgebanding uses a 15/16 inch by 3mm profile, so installers work with a known size when setting up trimmers and routers for flush trimming. The combination of that width and thickness gives extra material at the face, which supports clean passes with edge tooling while still fully covering the panel edge. The flex PVC base works within standard edgebanding processes on cabinet shops and woodworking lines. The CP41178 embossed lacquered finish is factory-applied, so once the band is bonded and trimmed, the edge is visually complete without additional finishing steps.
This Rehau PVC edgebanding, part number 301021-350, uses the CP41178 embossed lacquered surface so the edge arrives with texture and finish built in, which helps cabinet fronts and casework edges match adjacent surfaces after trimming. Because the band is 3mm thick, the visible edge presents a substantial face that reads as part of the overall design rather than a thin strip, which can be important on doors, drawer fronts, and shelving. The 15/16 inch width allows the band to fully cover standard substrate thickness while leaving a manageable margin along both sides, supporting careful alignment during application. With a 300 foot roll length, shops can run multiple cabinets or room sets from the same edgebanding, helping maintain uniform edge appearance across groupings of panels.
The 15/16 inch by 3mm dimensions on this flex PVC edgebanding give installers fixed, predictable stock to set up trimming equipment, which supports repeatable results when processing multiple parts. The 3mm thickness leaves enough material to dial in trimming tools without risking chatter through to the core, which helps edges stay smooth along long runs. The flex PVC construction is designed as an edge banding material, so it works within typical cabinet and furniture edgebanding workflows on straight components. The CP41178 embossed lacquered surface is applied at the factory, reducing steps at the bench because the edge appearance is established when the band is bonded. The 300 foot length lets production teams repeat that setup over many pieces without switching materials mid-run.
Rehau PVC edgebanding 301021-350 is 15/16 inch wide and 3mm thick, giving coverage over standard panel edges with extra material for accurate trimming in cabinet and furniture work.
The CP41178 embossed lacquered surface puts texture and finish directly on the edgebanding, so edges look finished immediately after bonding and trimming in the shop.
This Rehau edge banding is PVC, providing a purpose-made plastic edge material for cabinet and furniture panels that works with standard edgebanding processes.
The 3mm thickness builds a substantial front edge, helping doors, drawer fronts, and shelving handle regular contact while keeping the substrate edge covered.
The 15/16 inch width spans the panel edge with slight overhang, giving room to trim back to a clean, flush edge without exposing the core on finished parts.
The 300 foot roll length lets shops run multiple cabinets or projects from one edgebanding, helping keep edge appearance consistent across many parts.
This Rehau PVC edgebanding 301021-350 combines a 15/16 inch by 3mm profile, flex PVC material, and a CP41178 embossed lacquered surface to deliver finished, protected panel edges in cabinet and furniture projects. The 300 foot length supports continuous production with consistent results. Choose this edge banding when a PVC solution with established size, finish, and roll length aligns with your panel work.
Sold In: 1 Roll