Rehau PVC edgebanding 301021-356 is a PVC edge banding that finishes exposed panel edges so cut substrates present a uniform, protected edge in cabinet and furniture work. The 15/16 x 3mm size covers standard panel thicknesses while providing enough material for precise trimming and flushing without exposing the core. The FLEX designation indicates a flexible PVC construction that conforms around typical straight runs and gentle contours, which helps when working on varied casework layouts. The CP21015 reference identifies a specific design or matching program, supporting consistent visual results across related components using the same code. The embossed lacquer surface adds texture and sheen on the edge, so the banding delivers a finished appearance that coordinates with embossed and lacquered panel faces in a project. The 300FT length provides extended run capacity, supporting production runs and multiple jobs without frequent material changeover.
The 15/16 x 3mm dimension on this Rehau PVC edge banding gives a comfortable margin over common panel thicknesses, which simplifies alignment on the edgebander and reduces the chances of an under-sized strip at the substrate edge. The FLEX PVC construction works with typical edgebanding equipment that handles flexible thermoplastic materials, helping the strip feed smoothly through the machine path. The embossed lacquer surface is already finished when applied, so once the banding is bonded and trimmed, the edge presents its final look without separate coating steps. The CP21015 reference keeps the visual specification tied to a known design, which supports repeatable setups on follow-on jobs using the same coded material.
This Rehau, Inc. PVC edge banding sits within the edgebanding category, so it is used on exposed edges of laminated or coated panels in woodworking and cabinet construction. The 15/16 width suits edges on casework sides, shelves, and door or drawer fronts sized around common panel thicknesses, giving a consistent reveal after trimming. The 3mm thickness makes sense on components where a pronounced edge profile is desired, such as contemporary cabinet fronts, work surfaces, or fixture panels. The embossed lacquer surface aligns with projects that use embossed and lacquered finishes on faces, so doors, drawer fronts, and cabinet ends carry a coordinated look around all visible edges. The CP21015 designation lets shops align this banding with matching fronts and panels that reference the same design code across a run.
The 15/16 x 3mm sizing on the Rehau 301021-356 PVC edgebanding supports repeatable machining because operators can run standard edgebander settings for this thickness while trimming flush to the face material. The FLEX PVC description indicates a flexible strip, which helps the band sit uniformly along the length of the panel edge instead of resisting minor variations in the substrate, supporting more consistent glue lines and trimming. The embossed lacquer surface is integral to the band, so its finished character stays consistent from roll start to roll end, which matters when edging a bank of cabinets or a full fixture package in one project. The 300FT length reduces roll changes during production, helping maintain alignment and setup conditions over multiple panels so finished parts within a job share the same edge appearance.
Rehau 301021-356 edgebanding uses PVC, giving a thermoplastic edge that bonds with standard edgebanding processes and provides a finished surface around the panel perimeter.
The 15/16 x 3mm size covers typical panel thicknesses with extra width for trimming, creating a substantial, flush edge on doors, drawer fronts, and carcass panels.
The FLEX PVC construction allows the banding to follow straight runs and gentle curves, helping it lay flat on the substrate during application and trimming operations.
The CP21015 designation ties the edgebanding to a specific design reference, supporting visual consistency when matching edges to panels and fronts using the same code.
The embossed lacquer finish gives the edge texture and sheen, so banded panels align visually with embossed and lacquered faces in cabinetry and fixture work.
The 300FT length supports longer production runs from a single roll, reducing interruptions during cabinet or panel edging and helping keep setup conditions consistent.
The Rehau PVC edgebanding 301021-356 combines a 15/16 x 3mm profile, FLEX PVC construction, and an embossed lacquer CP21015 surface to support clean, matched edges on cabinets and furniture. By using this defined design and size, shops can edge doors, drawer fronts, shelves, and carcass panels with a consistent look and substantial 3mm profile around the project. For woodworking operations seeking repeatable results with a coded PVC edge solution, this Rehau edge banding aligns panel edges with the intended CP21015 design across current and follow-on jobs.
Sold In: 1 Roll