Rehau PVC edgebanding 301021-358 is a PVC edge banding from Rehau, Inc. that finishes raw panel edges, so exposed core material is covered for a cleaner, more professional look on casework and cabinetry. The 15/16 inch width works with panels where the edge banding needs to span standard board thickness with a small trim allowance, which supports tight visual alignment along cabinet sides and shelves. The 3mm thickness provides a substantial edge profile that helps create a solid, defined front edge on doors, drawer fronts, and carcass parts. The FLEX CP20956 designation identifies it as a flexible PVC product, which aids in running continuous edges along straight runs and gentle curves during production work. The embossed lacquered surface noted as EMB LAC adds a textured, finished face, helping the edge visually coordinate with laminated or coated panel surfaces on finished installations. The 300ft length supports longer runs and repeat jobs from a single roll.
The 15/16 x 3mm sizing in the SAP description sets clear expectations for setup on an edgebander, so guides, cutters, and trimming stations can be dialed in to this width and thickness for repeatable results. The FLEX reference signals that the PVC material is suited to edge banding workflows where the band needs to feed smoothly through automatic or manual equipment, supporting consistent tension and tracking. The embossed lacquered surface aligns with finishing stages, so once the edgebanding is applied and trimmed, the edge presents a ready-to-use face that pairs with laminated or coated board faces. The 300ft length gives a predictable linear yield per roll, which supports job planning, cut lists, and sequencing multiple components without frequent material changes.
This Rehau PVC edgebanding, classified by Wurth Baer Supply as edge banding in the Edgebanding category, is oriented to woodworking industry applications where exposed sheet-good edges need to be finished. The 15/16 inch width suits cabinet carcasses, shelving, and fronts made from common panel materials sized so that the band slightly overhangs for trimming, which supports tight seams along cabinet ends and vertical partitions. The 3mm thickness gives enough material at the edge to read as a substantial band, which works well on commercial casework, residential cabinetry, and shop fixtures that use a thicker front edge appearance for durability and style. The FLEX CP20956 PVC construction matches production environments using edgebanders that handle flexible thermoplastic banding, so runs of doors and panels can be processed in sequence. The embossed lacquered (EMB LAC) surface contributes to a finished visual match where panels feature decorative or protective topcoats.
The defined 15/16 x 3mm dimension in the SAP description helps keep setup consistent across machines and shifts, because operators can adjust pressure, trimming, and scraping stations to a known width and thickness and repeat that profile from project to project. The FLEX designation on this PVC edge banding supports smooth feeding during continuous runs, which helps maintain even pressure at the glue line and steady tracking, reducing the likelihood of wavy or misaligned edges on cabinet parts. The embossed lacquered surface described as EMB LAC provides a ready-finished outer face, so after trimming and scraping, the edge presents a uniform texture and sheen along doors, drawer fronts, and visible carcass edges. The 300ft roll length called out in the SAP description supports batching parts of similar size, because the consistent supply of banding lets shops organize cut lists around the roll capacity and keep workflow moving without stopping to switch rolls mid-run.
Rehau PVC edgebanding 301021-358 is specified as 15/16 inch wide and 3mm thick, which supports trimming to a flush, substantial edge on common cabinet and casework panels.
The FLEX CP20956 in the SAP description identifies this product as a flexible PVC edgebanding variant, which suits edge banding workflows using equipment designed for flexible thermoplastic bands.
The SAP description specifies 300ft, giving predictable linear coverage so shops can plan cabinet and casework runs around that available length.
The EMB LAC description indicates an embossed lacquered surface, providing a textured, finished face that visually upgrades exposed panel edges after banding.
The 3mm thickness builds a pronounced edge profile, giving doors, drawer fronts, and carcass edges a solid-looking band that coordinates with thicker-front cabinet styles.
Rehau PVC edgebanding 301021-358, in the Edgebanding category, suits woodworking projects where raw panel edges on cabinets, shelves, and fixtures need a finished PVC edge.
This Rehau PVC edgebanding 301021-358 pairs a 15/16 x 3mm profile with a flexible PVC body and an embossed lacquered surface, so cabinet and casework edges present a finished, substantial band. The 300ft length supports both single jobs and repeat work from the same roll. For woodworking production using Rehau, Inc. PVC edge banding, this specification helps align edgebander setup, visual appearance, and run planning around a single, clearly defined product.
Sold In: 1 Roll