Rehau PVC edgebanding 301021-359 is a PVC edge banding designed to finish exposed panel edges so they look uniform and protected along the full run. The 15/16 inch width covers typical panel thickness with a bit of overhang to trim back, which supports a flush, professional edge after machining. The 3mm thickness gives the edge a substantial profile that stands up to regular use while maintaining a consistent visual line on doors, drawer fronts, or panels. The FLEX designation indicates a flexible PVC construction that follows straight runs and gentle curves, helping panels tie together visually across a project. The CP21001 embossed lacquer surface brings a textured, lacquered appearance to the edge, so banded panels visually align with matching finishes in the same program. A 300FT length supports longer production runs or multiple cabinets from one coil, reducing changeovers during fabrication.
This Rehau PVC edge banding is specified at 15/16 inch by 3mm, so it suits panel builds that need full edge coverage with some overhang for trimming after application. The 3mm build works well where a pronounced edge profile is desired, such as cabinet doors or heavier-use panels. The FLEX PVC construction supports typical edgebander workflows, allowing the material to feed, wrap, and trim around standard cabinet parts. With a 300FT length, one coil can serve a sequence of matching components, which helps keep color and surface consistent throughout a run.
This Rehau PVC edgebanding sits in the edge banding class, making it a straightforward choice wherever exposed board edges need covering. The 15/16 inch width pairs well with commonly used panel thicknesses in cabinet and casework, leaving just enough overhang to trim after application. The 3mm thickness suits doors, drawer fronts, and visible carcass edges where a more substantial edge profile is preferred, reinforcing the visual frame of each component. The CP21001 embossed lacquer finish makes this banding a match for projects built around that specific decor, helping the face and edge share the same texture and lacquer look. As a FLEX PVC product, it fits installations that require the banding to track along long straight edges while still managing gentle curves on certain parts. The 300FT coil length supports shop environments handling multiple parts in the same color sequence.
The defined 15/16 inch width gives installers a predictable amount of overhang, simplifying edgebander setup and trimming steps so the finished edge lanes stay consistent. The 3mm thickness helps edgebanders hold settings from part to part, which supports repeatable results on doors and fronts built from the same material. The FLEX PVC construction feeds smoothly through typical edge banding equipment, assisting in maintaining straight tracking along the panel edge during production. The CP21001 embossed lacquer surface allows the edge banding to visually lock in with panels using that decor code, reducing the chance of visible mismatch between face and edge. With a 300FT length on a single SKU, shops can run a sequence of matching parts without needing to interrupt production to change color or finish, which helps keep projects aligned to the same material batch.
Rehau PVC edgebanding 301021-359 is specified at 15/16 inch width by 3mm thickness, so it covers typical panel edges with enough material for trimming to a clean, flush finish.
Rehau PVC edgebanding 301021-359 is identified as FLEX, indicating a flexible PVC construction that works well on straight runs and gentle curves during standard edge banding operations.
Rehau PVC edgebanding 301021-359 is listed at 300FT in length, providing enough material for multiple cabinet components or a full job in the same color run.
Rehau PVC edgebanding 301021-359 uses a CP21001 embossed lacquer surface, giving the edge a textured, lacquer-style appearance that pairs with matching decor panels.
Rehau PVC edgebanding 301021-359 is an edge banding used on exposed panel edges, such as cabinet doors, drawer fronts, and carcass edges that use the same CP21001 decor.
Rehau PVC edgebanding 301021-359 at 3mm thickness creates a pronounced edge profile on doors and panels, supporting a solid visual frame and consistent appearance across parts.
Rehau PVC edgebanding 301021-359 combines 15/16 inch width, 3mm thickness, FLEX PVC construction, and a CP21001 embossed lacquer surface to support consistent cabinet edges. The 300FT coil length suits shop or job runs using that specific decor.
Sold In: 1 Roll