Rehau PVC edgebanding 301021-360 is a PVC edge banding from Rehau, Inc. that covers and protects raw panel edges, so cabinetry and furniture projects get a finished working edge instead of exposed core material. The 15/16 inch width provides coverage across standard panel thicknesses with room to trim, which supports accurate flush-trimming and a tight visual line along doors, drawer fronts, and casework. The 3mm thickness creates a more substantial edge profile than thin tape, so impact-prone edges on cabinets and fixtures gain extra material at the front where edges see the most contact. This edgebanding is described as FLEX, signaling a flexible PVC construction that helps it follow long runs or gentle curves while maintaining consistent pressure during application. The CP60597 EMB LAC description identifies a specific embossed lacquer surface, so matching across multiple pieces stays consistent when using this same material on a project.
This Rehau PVC edge banding uses a 15/16 inch width, giving installers extra coverage beyond the face of typical panels so flush trimming can bring the edge down clean without starving the front. The 3mm thickness builds a solid edge at the front of cabinet parts, which is useful when a thicker profile is desired for durability or visual weight. The CP60597 EMB LAC callout defines an embossed lacquered surface, so the finish character stays consistent wherever this same banding is applied on a job. With a 300FT length identified in the description, long cabinet runs or repeated parts can be edged from the same coil, supporting uniform color and texture along all treated edges.
Rehau PVC edgebanding 301021-360 is categorized as edge banding, so its role is to finish and protect exposed edges on panels used in cabinetry and other woodworking projects. The 15/16 inch width lets it cover the full edge and a small margin of the face, which is useful on case sides, shelves, and door fronts where a clean transition from face to edge is important. At 3mm thick, this edgebanding can be used where a more pronounced edge detail is desired, such as on contemporary cabinet fronts or commercial fixtures that benefit from a sturdy front edge. The specific CP60597 EMB LAC surface identified in the description supports visual consistency when the same material is applied across multiple cabinet components in a project.
The FLEX designation in the SAP description indicates a flexible PVC construction, which helps the edgebanding follow panel edges smoothly and maintain contact during application along longer runs. Because the width is 15/16 inch, there is enough overhang for trimming tools to work without exposing core material, which supports repeatable, flush edges across many parts. The 3mm thickness means there is more PVC at the front edge, so light machining of corners or slight edge profiling stays within the material while still protecting the substrate. With the 300FT length specified, many parts on a job can be edged from a single coil, which helps keep color and texture consistent wherever CP60597 EMB LAC edgebanding is used.
Rehau PVC edgebanding 301021-360 has a 15/16 inch width, giving coverage across standard panel thicknesses with extra margin for trimming, which supports clean, flush edges on cabinet and furniture parts.
Rehau PVC edgebanding 301021-360 uses a 3mm thickness, creating a more substantial edge profile that adds material at the front, which is useful for impact-prone cabinet and furniture edges.
Rehau PVC edgebanding 301021-360 is described as FLEX, indicating a flexible PVC construction that helps the banding follow straight runs and gentle curves while maintaining contact during application.
Rehau PVC edgebanding 301021-360 uses the CP60597 EMB LAC surface designation, identifying a specific embossed lacquer finish that supports consistent texture and appearance across matching parts.
Rehau PVC edgebanding 301021-360 is described as 300FT, providing a long continuous run so many parts can be edged from one coil, helping maintain uniform color and finish.
Rehau PVC edgebanding 301021-360 is classified as edge banding for panel edges, fitting applications such as cabinetry and woodworking projects that need finished, protected edges.
The Rehau PVC edgebanding 301021-360 combines a 15/16 inch width, 3mm thickness, FLEX PVC construction, and CP60597 EMB LAC surface to support consistent edge finishing on cabinetry and woodworking projects. The size and flexible material work together to cover panel edges with enough surplus for trimming, helping you produce repeatable flush fronts. The specific embossed lacquer surface and 300FT length support consistent appearance across multiple parts on a job. For projects that call for a substantial PVC edge profile with a defined finish code, this Rehau edge banding offers a clear, part-numbered option for planning and execution.
Sold In: 1 Roll