Rehau PVC edgebanding 301021-361 is a Rehau, Inc. edge banding designed to finish and protect exposed panel edges in woodworking projects. The 15/16 inch width covers standard panel thickness with a small overhang, giving room to trim flush for a clean, straight edge. The 3mm thickness provides a substantial edge profile, supporting impact resistance at cabinet, furniture, or fixture fronts where panels see frequent contact. This edgebanding is manufactured from PVC, which offers a stable, uniform material that handles routine shop handling and regular use in finished installations. The FLEX designation in the description indicates a flexible product, allowing the roll to follow straight runs and moderate curves during application without fighting the material. The CP41122 reference in the description identifies a specific color or design line, helping match this banding to coordinated components on a project. The 300ft length supports longer runs or multiple cabinets from a single roll.
This Rehau PVC edge banding is specified at 15/16 inch by 3mm, giving installers a familiar format for panel edging. The width slightly exceeds standard nominal panel thicknesses, allowing trimming equipment to remove a small overhang and leave a clean, aligned edge without exposing the core. The 3mm thickness works with edgebanders and trimmers set for thicker edge treatment, providing a noticeable edge profile where that detail is desired. The 300ft roll length supports both one-off builds and light production runs from the same product, keeping calibration and setup consistent across multiple pieces. The flexible PVC construction described in the FLEX designation works with powered edgebanders or manual application methods that are suited to PVC banding.
This Rehau PVC edgebanding in 15/16 inch width is sized to cover typical panel edges encountered in cabinet and furniture construction, so the banding spans the core and any surface material with room for trimming. The 3mm thickness helps define the edge visually and physically, which is useful on cabinet doors, drawer fronts, and exposed shelf edges that benefit from a more pronounced profile. Because it is an edge banding product in the Miscellaneous | Edgebanding category, it fits naturally into standard woodworking workflows wherever raw or cut panel edges need a finished treatment. The PVC composition supports machining and trimming in a way familiar to shops already working with PVC-based materials.
The FLEX note in the SAP description indicates this is a flexible PVC edgebanding, so the material can follow panel edges without resisting moderate directional changes. That flexibility supports application on straight cabinet sides, toe-kicks, and modest radius sections where a rigid strip would be harder to control. The CP41122 and 301021-361 identifiers define this exact variant within the Rehau range, so once this banding is qualified for a job, it becomes straightforward to call out the same part number for repeat work.
The 300ft length described for this Rehau PVC edgebanding supports efficient shop production, as one roll can handle multiple cabinet runs or a full room of casework without frequent changeovers. Fewer roll swaps help maintain consistent machine settings through a job, which reduces adjustment time and supports uniform edge appearance from the first panel to the last. The flexible nature referenced by FLEX also matters over this length, since a compliant material feeds more smoothly through edgebanders, helping keep tension and tracking steady across long passes.
The CP41122 code and the manufacturer part number 301021-361 give a precise identification of this PVC edgebanding variant, which helps align edge material with coordinated surfaces or previously installed components. When a project or specification calls out this exact part number, using this banding helps maintain consistent color and texture from job to job. The classification as Rehau PVC Edgebanding and Edge Banding confirms its role in the assembly, so shops can integrate it confidently into existing processes for banding, trimming, and finishing.
Rehau PVC edgebanding 301021-361 is specified at 15/16 inch by 3mm, providing coverage for typical panel edges with enough overhang for trimming to a flush finished edge.
Rehau 301021-361 edge banding is made from PVC, giving a uniform, machinable material that works well with standard edgebanders and trimming tools in woodworking shops.
The Rehau CP41122 PVC edgebanding with part number 301021-361 is described with a 300ft length, supporting extended runs and multiple projects from a single roll.
The FLEX designation in the description indicates a flexible PVC edgebanding, helping the material track along straight runs and moderate curves during installation without excessive spring-back.
The CP41122 code identifies a specific Rehau design or color line, helping match this 301021-361 edgebanding to coordinated finishes or existing Rehau components on a project.
Rehau PVC edge banding 301021-361 is used to finish and protect exposed panel edges in cabinets, furniture, and similar woodworking projects where a PVC edge treatment is specified.
Rehau PVC edgebanding 301021-361 delivers a 15/16 inch by 3mm flexible PVC strip sized for standard panel work, with a 300ft length that supports jobsite and shop production. The CP41122 and 301021-361 identifiers define the exact Rehau design, helping align edge treatment with specified finishes. For projects calling for a PVC edge banding in this width, thickness, and design line, this product provides a clearly defined option for consistent, repeatable edging results.
Sold In: 1 Roll