Rehau PVC edgebanding 301021-362 15/16 x 3mm

Rehau PVC Edgebanding 301021-362 For Clean Edges

Rehau PVC edgebanding 301021-362 is a flexible PVC edge banding designed to finish exposed panel edges in woodworking projects. The 15/16 inch width covers standard panel thicknesses with a bit of overhang, giving room to trim back to a clean, flush edge. The 3mm thickness creates a substantial edge profile, which supports a more solid feel on cabinet and furniture parts. The FLEX designation in the description indicates a flexible construction, allowing the material to follow straight runs and gentle curves commonly found in casework. The SAP description references CP41123 and EMB LAC, identifying a specific color and finish combination so runs on a job stay visually consistent. The 300FT designation indicates a continuous 300 foot length, which supports longer production runs and reduces interruptions between parts during edging work.

Key Edgebanding Details For Shop Use

• The 15/16 inch width gives coverage beyond typical panel thickness, which allows trimming back for a precise, chip-free finished edge on cabinetry or furniture parts.
• The 3mm thickness builds a more robust edge profile, which supports a durable-feeling edge on doors, drawer fronts, and shelving components during everyday use.
• The FLEX identification describes a flexible PVC construction, which helps the banding conform along cabinet sides and shelves without fighting the material during application.
• The 300FT length in the SAP description provides a long continuous run, which supports edging many parts in sequence and helps maintain color continuity across a project.
• The CP41123 EMB LAC reference ties to a specific appearance, which helps installers match existing runs of the same Rehau edgebanding on repeat or repair work.

Edgebanding Dimensions And Application Fit

This Rehau PVC edgebanding uses a 15/16 inch width, giving enough material to cover the face of common sheet goods while leaving trim allowance for edge banding tools. The 3mm thickness forms a defined edge profile, which works well where a more substantial front edge is desired on cabinet components. Being described as FLEX PVC edgebanding, the product is suited to standard edgebanding application methods where a flexible band follows the panel edge. The defined part number 301021-362 identifies this exact combination of width, thickness, material, and appearance so replacement or extension work can be matched to earlier installations using the same specification.

Using This Rehau PVC Edgebanding In Projects

Where This 301021-362 Edgeband Is Applied

This Rehau, Inc. PVC edgebanding is identified as edge banding under the edgebanding category, positioning it for use on exposed panel edges in cabinetry and woodworking. The 15/16 inch width suits edging on panels cut from sheet stock where the finished thickness is covered with some extra width for trimming, such as cabinet sides and shelves. With a 3mm thickness, the edgebanding supports use on cabinet doors and drawer fronts where a pronounced edge is preferred over thin tape-style banding. The FLEX designation points to use in general straight and modestly contoured applications, such as casework interiors, shelving, and panels that require a consistent edge treatment around visible sides.

Why These Dimensions Support Consistent Results

The 15/16 inch by 3mm size on Rehau PVC edgebanding 301021-362 helps installers work to repeatable standards by pairing a slightly oversized width with a stable thickness. The extra width allows trimming tools to remove just enough material to align the band flush with the panel face, supporting a uniform reveal from part to part. The 3mm thickness is substantial enough to tolerate normal handling while parts are processed, helping reduce edge damage during typical woodworking workflows. The FLEX construction helps the banding track along the panel edge, which can reduce rework from misalignment or lifting along the run. The specific CP41123 EMB LAC identification means the same part number can be specified again later, supporting visual continuity during future additions or repairs built to match existing pieces.

Common Questions About Rehau PVC Edgebanding 301021-362

Select Rehau 301021-362 For Matching Edges

Choose Rehau PVC edgebanding 301021-362 when a 15/16 inch by 3mm flexible PVC edge banding is needed to finish cabinet or furniture panels. The defined CP41123 EMB LAC part identification helps keep new work aligned with existing projects that rely on this specific Rehau edge banding.