Rehau PVC edgebanding 301021-363 is PVC edge banding that covers and protects exposed panel edges on cabinetry and casework projects, so finished parts present a uniform, professional edge instead of raw board. The 15/16 inch width works with typical 3/4 inch panels, giving a small overhang for trimming and flush routing after application. The 3mm thickness adds a substantial edge profile, supporting machined corners and offering a solid look where panel edges are visible in everyday use. The FLEX designation identifies this as flexible PVC material, so it follows normal cabinet runs and gentle curves during standard edgebanding workflows. The CP41280 EMB LAC description identifies the specific Rehau finish combination, allowing repeat orders on future jobs where a consistent edge appearance is required. The 300FT notation designates a 300 foot length, supporting production runs where multiple cabinets or panels use the same color and size.
The 15/16 inch by 3mm format of this Rehau PVC edgebanding works with typical 3/4 inch panel stock so edge application, trimming, and routing line up with standard cabinet and casework processes. The slight width overhang provides material for flush trimming, which helps installers achieve tight seams and square corners after machining. The 3mm thickness offers a robust edge, giving trimming tools enough material to work cleanly without cutting into the panel face when properly set up. The FLEX PVC construction supports feeding through standard edgebanders or hand application methods used with PVC banding, so shops can integrate this size into existing workflows. The 300FT length allows extended runs on the same setup, which is useful when producing matched fronts, ends, and shelves that all use the same edge size and finish.
This Rehau PVC edgebanding, identified by manufacturer part 301021-363 and classified as edge banding, is designed for covering exposed edges on panels used in cabinetry and other panel-based constructions. The 15/16 inch width is suited to projects built around 3/4 inch panel materials, such as cabinet sides, doors, drawer fronts, and shelving, where a finished edge is required along visible perimeters. The 3mm thickness provides a more substantial edge detail than thin tape-style options, which fits projects where edges are a regular touch point, such as cabinet openings and shelf fronts. The CP41280 EMB LAC finish designation ties the banding to a specific Rehau appearance, supporting consistent visual results when panels, fronts, and ends are edged from the same material identifier.
The 15/16 inch width on this PVC edgebanding gives added material beyond 3/4 inch panels, which supports repeatable trimming results by allowing tools to remove surplus from both faces to reach a centered, flush edge. The 3mm thickness gives a defined profile, so trimming, scraping, and light profiling operations maintain a solid feel at the panel edge rather than a thin skin. The FLEX designation indicates a flexible PVC construction, which helps the banding track evenly along straight runs and mild contours as it is applied, supporting uniform glue lines and consistent pressure along the length. The 300FT roll length supports repeatability over a job, since multiple doors, drawer fronts, and panels can be processed from the same continuous run, helping finished components share the same edge appearance across the project. The manufacturer part number 301021-363 provides a precise identifier, allowing shops to reorder the same material to match earlier installations or expand an existing layout.
Rehau PVC edgebanding 301021-363 is 15/16 inch wide and 3mm thick, which works with common 3/4 inch panels and gives enough material for trimming to a flush, centered edge.
The 3mm PVC thickness creates a substantial edge profile, supporting everyday contact at corners and openings and giving trimming tools enough material for clean, controlled cuts.
The FLEX designation identifies this as flexible PVC edgebanding, so it follows typical straight runs and gentle transitions during cabinet and panel edging operations.
Rehau PVC edgebanding 301021-363 is supplied in a 300FT length, supporting multiple cabinets or panel runs that share the same color, width, and thickness.
The 15/16 inch width provides slight overhang on 3/4 inch panels, giving trimmers room to remove excess and leave a clean, flush finish on both faces.
CP41280 EMB LAC is part of the Rehau description that identifies this specific finish combination, helping shops match edge appearance across panels and future orders.
Rehau PVC edgebanding 301021-363 combines a 15/16 inch width, 3mm thickness, FLEX PVC construction, and a 300FT length to support cabinet and panel edge finishing in production or project work. The size aligns with common 3/4 inch materials, while the flexible PVC format and defined thickness support clean trimming and a solid-feeling edge. The CP41280 EMB LAC and 301021-363 identifiers tie each run to a specific Rehau finish, so repeating successful results on follow-up jobs is straightforward. For projects built around this width, thickness, and finish, this Rehau PVC edge banding offers a clearly defined option for creating consistent, finished panel edges.
Sold In: 1 Roll