Rehau PVC edgebanding 301021-364 15/16 x 3mm

Rehau PVC Edgebanding 301021-364 For Clean Edges

Rehau PVC edgebanding 301021-364 is a PVC edge banding from Rehau, Inc. that covers and protects raw panel edges, so cabinet and furniture projects gain a finished appearance instead of exposed core. The 15/16 inch width stated in the SAP description gives coverage for common 3/4 inch panels with margin for trimming, helping installers achieve a flush edge after trimming passes. The 3mm thickness specified in the SAP description provides a substantial edge profile, so high-contact edges feel solid and visually defined on doors, drawer fronts, and casework. The FLEX designation in the SAP description indicates a flexible construction that conforms around normal cabinet edges, supporting consistent results when working along straight runs. The CP21001 code in the SAP description identifies a specific edgebanding formulation, which helps shops match this banding across repeat jobs. The 300FT length identified in the SAP description provides a continuous roll that supports longer runs on production or multi-cabinet layouts.

Key Rehau PVC Edge Banding Working Advantages

• The 15/16 inch width from the SAP description gives coverage over typical 3/4 inch panels, so there is material to trim back to a precise flush edge without exposing core material.
• The 3mm thickness noted in the SAP description creates a thicker edge profile, so high-wear cabinet fronts gain a more substantial feel and a defined visual edge along doors and drawer fronts.
• The FLEX notation in the SAP description identifies a flexible PVC construction, so the edgebanding follows standard straight cabinet edges smoothly for predictable application during runs.
• The CP21001 reference in the SAP description designates a specific product variant, so shops can order the same edgebanding when they need visual and material continuity across projects.
• The 300FT length stated in the SAP description provides a long roll, so installers can run multiple cabinets or a full kitchen layout while working from a single continuous coil.

Edgebanding Size And Roll Details For Installation

The SAP description listing of 15/16X3MM defines both width and thickness, so installers can match this Rehau PVC edgebanding to panel dimensions and standard edge-banding equipment for trimming and finishing. The 15/16 inch width provides extra coverage beyond a 3/4 inch substrate, allowing trimming operations to cut back to a clean line without risking edge show-through. The 3mm thickness supports a more robust edge, so routing and flush trimming steps leave enough material to maintain the intended profile on cabinet fronts. The 300FT roll length described in the SAP entry offers an extended continuous run, so edge-banding setups can stay in production longer between roll changes. The PVC material identified in the product name and category defines the working characteristics, so heat-based edgebanding processes can be planned around a known PVC edge banding behavior.

Using This Rehau PVC Edgebanding In Woodworking

Where This 15/16 X 3mm Edgebanding Fits Best

The product class Edge Banding and SAP description 15/16X3MM FLEX CP21001 LAC 300FT position this Rehau PVC edgebanding 301021-364 for cabinet and furniture panel edges that need a finished look. The 15/16 inch width works with common 3/4 inch sheet goods, so shop layouts using standard panels can rely on consistent coverage along exposed sides and fronts. The 3mm thickness supports heavier-use areas such as cabinet doors, drawer fronts, and case edges, where a thicker edge can carry the visual line of the project. The FLEX designation supports normal straight-edge cabinet runs, so production lines and serious DIY setups can handle repeated passes along panels with stable tracking. The PVC identification in the product name and category aligns this banding with PVC-focused edge-banding equipment for routine shop workflows.

Why These Rehau Details Support Repeatable Results

The Manufacturer Part # 301021-364 and matching SAP description give a precise identifier, so shops can specify this exact Rehau PVC edgebanding when they want the same 15/16X3MM FLEX CP21001 LAC 300FT characteristics on follow-up jobs. The defined 15/16 inch width and 3mm thickness allow installers to dial in machine settings around a stable dimension set, which supports repeatable trimming, routing, and finishing results across runs. The 300FT length noted in the SAP description means fewer roll changes during projects, so edge-banding lines can maintain consistent heat settings and feed rates over longer sequences. The FLEX reference describes a flexible construction, so feeding and handling along normal straight edges stay predictable as operators guide panels through edgebanding equipment. The identification of the product as Edge Banding within the category clarifies its role in the assembly, anchoring it as the finishing layer over raw board edges.

Common Questions About Rehau PVC Edgebanding 301021-364

Select Rehau 301021-364 For Defined Panel Edges

Rehau PVC edgebanding 301021-364 from Rehau, Inc. combines a 15/16 inch width, 3mm thickness, FLEX construction, and a 300FT roll length described in the SAP entry, so installers can plan cabinet and furniture edge work around stable, repeatable dimensions. The Manufacturer Part # 301021-364 and CP21001 designation in the SAP description give straightforward ordering references, so shops can align ongoing projects to the same PVC edge banding. For woodworking operations that rely on predictable edge coverage and a solid profile on visible fronts, this Edge Banding product class provides a clearly defined PVC option.