Rehau PVC edgebanding, 301021-368, is a PVC edgebanding from Rehau, Inc. that finishes raw panel edges so exposed substrate is covered and protected during use. The product class of edge banding means this material is intended to cap and protect edges on panels or components where a clean, consistent edge is needed. The SAP description 15/16X3MM FLEX CP40996 LAC 300FT shows that this edgebanding has a width of 15/16 inch, a thickness of 3mm, and a flexible construction for working around standard straight runs in cabinet or woodworking projects. The 300FT length provides a long continuous run so multiple doors, drawer fronts, or case parts can be edged from a single coil without frequent material changes.
The 15/16X3MM dimension in the SAP description defines a 15/16 inch wide, 3mm thick strip, which fits common panel thicknesses while leaving enough overhang to trim back after bonding. That width-to-thickness combination gives installers room to align the tape on the edge and then trim it flush without exposing the core material. The FLEX designation in the same description indicates a flexible PVC format, which helps the banding lie flat along straight panel edges during the edging process. The 300FT length provides a single continuous coil, which supports uninterrupted edging runs on multiple parts.
This Rehau PVC edgebanding, identified as 301021-368 and classified as edge banding, is suited to closing off raw edges on cabinet, furniture, or general woodworking components where PVC edging is specified. The 15/16 inch width from the 15/16X3MM FLEX CP40996 LAC 300FT description gives coverage for boards sized around standard casework thicknesses, so both top and bottom faces of the panel edge receive full coverage before trimming. Because the material is PVC edge banding, it matches workflows that depend on PVC for impact resistance and a uniform edge appearance around doors, drawer fronts, and shelves. The 3mm thickness provides a visually substantial edge profile compared to thinner options, which can support design choices that call for a more pronounced edge line on exposed panels. The defined manufacturer part number 301021-368 allows shops to specify the same edge banding again when repeating a job, which maintains a consistent edge look across future runs.
The FLEX designation in the 15/16X3MM FLEX CP40996 LAC 300FT SAP description indicates a flexible PVC construction, which helps the strip conform closely along straight panel edges so pressure during bonding is transferred evenly. That flexibility matters when working through longer cabinet sides or tall panels, because it supports a smooth, continuous edge without gaps along the bond line. The 300FT coil length gives enough material to run many parts from a single roll, which helps keep color and profile consistent from one component to the next across a full project. The 3mm thickness noted in the description builds a thicker edge band than very thin tapes, which can allow more sanding and flushing operations without immediately cutting through to the substrate edge. The 15/16 inch width, again from the SAP description, provides a small amount of overhang beyond common panel thicknesses, which simplifies trimming operations after bonding and supports a clean, finished edge. With the manufacturer part number 301021-368 tying all these traits together, shops can document this exact edge banding in job notes so future replacements match the original installation.
Rehau PVC edgebanding, 301021-368, with 15/16X3MM in the description provides a 15/16 inch wide, 3mm thick strip, giving coverage and trim allowance on typical panel edges.
The 300FT length in the SAP description offers a long continuous coil, allowing multiple parts or full cabinet runs to be edged from one roll for consistent appearance.
The FLEX term in 15/16X3MM FLEX CP40996 LAC 300FT indicates a flexible PVC construction, helping the banding follow straight panel edges smoothly during edging.
The 3mm thickness in the SAP description creates a more substantial edge profile, supporting a defined edge line and allowing trimming while maintaining coverage.
The manufacturer part 301021-368 specifically identifies this Rehau PVC edgebanding, helping shops repeat orders and match edges across future projects.
The 15/16 inch width from the SAP description allows slight overhang on standard panels, supporting flush trimming for a clean, even finished edge.
The Rehau PVC edgebanding, 301021-368, combines a 15/16 inch width, 3mm thickness, and flexible construction as detailed in the 15/16X3MM FLEX CP40996 LAC 300FT description, giving coverage, trim allowance, and handling suited to edging panel components. The 300FT coil length supports edging multiple parts in a single run, while the defined manufacturer part number 301021-368 simplifies specifying the same material on repeat projects. Select this edge banding when a PVC edge with a pronounced 3mm profile is required on cabinet or woodworking pieces.
Sold In: 1 Roll