Rehau PVC edgebanding 301021-369 is a PVC edge banding from Rehau, Inc. that finishes exposed board edges so panel cores are covered and job-ready. The 15/16 inch width spans the full thickness of common casework panels, giving you coverage that helps hide core material along cabinet sides or shelves. The 3mm thickness adds a substantial edge profile that supports a solid, finished look on workpieces. This edgebanding is described as FLEX, which allows the material to conform around straight runs and gentle curves during application. The CP41474 reference identifies the specific design and color coordination for projects using that décor. The EMB LAC description indicates an embossed lacquer surface that brings texture and sheen together on the finished edge. Supplied in a 300 foot length, this product supports longer runs and repeat jobs using the same edge detail.
This Rehau PVC edgebanding uses a 15/16 inch width, giving you a margin over typical panel thickness so trimming operations can bring the edge flush without exposing the core. The 3mm thickness works as a solid-feeling edge that supports common machining and finishing steps on cabinet components. Being identified as FLEX, the PVC construction is suited to bending along gentle curves and corners, which helps when you are moving from one cabinet segment to another on the same run. The EMB LAC embossed lacquer surface provides a finished face that is ready to present once excess is trimmed, keeping the workflow focused on routing and cleanup rather than extra finishing steps.
Rehau PVC edgebanding 301021-369 is specified as edge banding in the edgebanding product class, so it serves as the finishing strip on exposed panel edges in woodworking and cabinet projects. The 15/16 inch width spans the face of standard carcass and shelf materials, giving you enough coverage to accommodate slight panel size variations while still trimming back to a clean line. With a 3mm thickness, this banding builds a substantial front edge that suits cabinet doors, drawer fronts, and shelving where the profile will be seen and handled. The FLEX designation means the PVC construction is suitable for edges that may transition across modest curves, such as gently radiused corners on countertops, partitions, or furniture ends. The CP41474 décor reference gives you a defined visual target when coordinating with matching surfaces, so panel faces and edges can share the same design theme on a run of casework or fixtures.
The 15/16 inch by 3mm size of this PVC edge banding supports consistent trimming and finishing along production runs, as the added width allows you to align the tape slightly proud and then trim back to an even edge. The 3mm thickness produces a stronger presence at the edge, which works well when you want a defined line between the face material and the side profile. As FLEX PVC edgebanding, it can follow the contour of straight and slightly curved edges in one continuous pass, reducing joint lines that can distract from the finished look. The EMB LAC description highlights an embossed lacquer surface, so the edge presents both texture and a lacquered appearance that can tie into board designs with similar treatments. With 300 feet available on the roll description, the same edge specification can be carried through multiple cabinets or casework sections, supporting uniform appearance across a full project run.
Rehau PVC edgebanding 301021-369 is described as 15/16 inch wide by 3mm thick, which supports full edge coverage and a substantial front profile on typical panel-based components.
This product is designated FLEX, indicating a flexible PVC construction that allows the edgebanding to follow straight runs and gentle curves along cabinet and furniture edges.
The SAP description lists 300FT, indicating a 300 foot length that supports extended runs or multiple projects using the same edge specification.
The CP41474 EMB LAC description indicates an embossed lacquer finish, combining a textured feel with a lacquered appearance on the visible edge surface.
Rehau 301021-369 is listed in the Edge Banding product class under the Edgebanding category, identifying it specifically as PVC edgebanding for finishing panel edges.
This PVC edgebanding is manufactured by Rehau, Inc., and the manufacturer part number 301021-369 links it to this exact décor, size, and finish.
Rehau PVC edgebanding 301021-369 from Wurth Baer Supply combines a 15/16 inch width, 3mm thickness, FLEX construction, and CP41474 EMB LAC finish into a defined edge solution for cabinet and woodworking projects. The 300 foot length supports repeated use of the same décor and size across job lots, helping projects maintain consistent appearance from unit to unit. For work that calls for PVC edge banding with these specific dimensions and surface characteristics, this Rehau option aligns directly with those requirements.
Sold In: 1 Roll