Rehau PVC edgebanding 301021-376 is a PVC edge banding designed to finish exposed panel edges so they look uniform and protected on the job. The 15/16 inch width covers standard panel thickness with a bit of overhang, which gives room for trimming to a tight, flush line. The 3mm thickness adds a solid front edge profile, which helps panels feel substantial and consistent across a run. The FLEX designation in the description identifies this as flexible PVC material, which allows the banding to follow straight runs and gentle curves for continuous coverage. The CP20936 reference in the description identifies the specific color or design family, which keeps visual matches consistent from project to project. The EMB LAC wording in the description denotes an embossed lacquer finish, which gives the edge a textured, finished surface that visually coordinates with finished panels.
The 15/16 inch width listed in the description gives you an edge strip that spans typical panel thickness with margin to trim, which helps achieve a clean, straight edge after processing. The 3mm thickness specified in the product description sets a robust edge profile, which suits applications where the front edge needs visual weight and durability in normal cabinet use. The EMB LAC embossed lacquer reference defines a textured, finished surface, which lets the banded edge visually integrate with panels that carry a similar finish. The FLEX designation on this PVC edgebanding identifies a flexible construction, which works with standard edgebanding equipment designed for PVC and helps during handling and alignment along panel edges.
This Rehau PVC edgebanding is identified as edge banding, so it is intended for finishing the exposed edges of panels in cabinet and woodworking projects. The 15/16 inch width stated in the description allows coverage of common substrate thicknesses while still leaving a small overhang, which can then be trimmed back for a precise, straight final edge. The 3mm thickness described in the product data delivers a thick front edge appearance, which is often selected for doors, drawer fronts, and case pieces that need a more substantial visual line. The CP20936 color or design reference and the 301021-376 manufacturer part number work together to define the exact appearance, which simplifies reordering the same edgebanding when building matching components over multiple phases of work.
The FLEX notation in the description indicates flexible PVC construction, which matters when feeding the product through edgebanding equipment or guiding it along panel edges by hand because the strip will follow the panel path instead of resisting bends. The PVC material named in the product title is widely used in edgebanding, which supports predictable trimming, scraping, and finishing behavior once bonded to the substrate. The EMB LAC embossed lacquer wording describes a textured, lacquered surface treatment, which helps the edge visually coordinate with panels finished to a similar look so runs of cabinets appear uniform. The 300FT reference in the description indicates a continuous length dimension, which supports longer production runs and helps maintain color continuity across multiple parts in a single project.
The Rehau PVC edgebanding 301021-376 is described as 15/16 inch wide by 3mm thick, which suits covering standard panel thickness while providing a substantial front edge profile.
The FLEX term in the description identifies this as flexible PVC edgebanding, which helps it follow panel edges and work smoothly with typical edgebanding processes.
The EMB LAC wording in the description indicates an embossed lacquer finish, which provides a textured, finished surface that coordinates with similar panel finishes.
The specified 3mm thickness creates a thick, pronounced front edge, which gives cabinet doors, drawer fronts, and panels a more substantial, uniform look across a project.
The CP20936 reference in the description identifies the specific color or design family, which helps maintain a consistent visual match on all related components.
The 300FT detail in the description indicates the length measure, which supports longer production runs while keeping the same color and finish throughout the job.
Rehau PVC edgebanding 301021-376 combines a 15/16 inch width, 3mm thickness, and flexible PVC construction, which aligns with common cabinet panel dimensions and standard edgebanding workflows. The CP20936 reference, EMB LAC embossed lacquer finish, and 301021-376 part number define a specific color and surface look, which supports consistent visual results across cabinets, doors, and casework built under the same project.
Sold In: 1 Roll