Rehau PVC edgebanding 301021-383 15/16 x 3mm

Rehau PVC Edgebanding 301021-383 For Clean Edges

Rehau PVC edgebanding 301021-383 is a PVC edge banding from Rehau, Inc. that provides a finished edge on board materials, giving casework and panels a defined boundary. The product class as edge banding means it is intended to cap exposed board edges so substrates are not left raw, which helps create a uniform appearance across a run of parts. The SAP description 15/16X3M FLEX CP60227 LAC 300FT identifies this as a 15/16 inch wide, 3mm PVC strip, giving coverage that matches common panel thicknesses in woodworking layouts. The "FLEX" reference in the description indicates a flexible PVC construction that follows straight runs and gentle curves, supporting consistent results on standard cabinet components. The 300FT reference signals a continuous length suited to repeat production work, reducing interruptions during edgebanding operations on multiple panels.

Key Edgebanding Details That Support Workflow

• The SAP description 15/16X3M FLEX CP60227 LAC 300FT defines the width and 3mm thickness, so installers can match this Rehau PVC edgebanding to typical panel dimensions for a balanced edge profile in cabinet and fixture construction.
• The designation FLEX in the SAP description indicates a flexible PVC construction, which lets the edge banding conform along standard straight edges and modest contours, supporting smooth runs without fighting stiff material during applications.
• The 300FT length in the SAP description indicates a long continuous run, which supports production environments by allowing multiple panels or components to be banded from one coil, limiting changeovers during repetitive edging tasks.
• The manufacturer part number 301021-383 ties directly to this specific Rehau PVC edgebanding, helping shops reference the exact product when reordering so successive jobs maintain the same edge appearance across projects.
• The product class listing as edge banding defines its role as an edge treatment on board materials, guiding its use toward closing off exposed substrate edges where a durable PVC strip is needed for a finished perimeter.

Installation Fit And Strip Format Details

The SAP description 15/16X3M FLEX CP60227 LAC 300FT identifies a 15/16 inch wide, 3mm PVC strip format, which aligns with edging typical casework panels so the banding covers the board edge without excessive overhang. As a PVC edge banding from Rehau, Inc., this product is shaped as a continuous strip that is suited to edgebanding machines or manual edging workflows that accept coiled material. The description reference to FLEX points to a flexible profile that lies along the board edge, supporting consistent tracking during application. With the product class designated as edge banding, this strip is intended to be applied along exposed edges of boards so installers work with a defined role for the material.

Using Rehau PVC Edgebanding 301021-383 In Work

Where This PVC Edge Banding Fits Best

The product class as edge banding places Rehau PVC edgebanding 301021-383 in applications where exposed board edges need a finished perimeter, such as cabinet carcasses, shelving, or panel components. The SAP description 15/16X3M FLEX CP60227 LAC 300FT defines a 15/16 inch width and 3mm PVC section, which suits many standard substrate thicknesses used in woodworking layouts. Because the description specifies FLEX, the banding is configured as a flexible strip, allowing it to follow straight edges and mild curves that occur on casework parts, which helps maintain a consistent line where boards meet doors, tops, or adjacent panels. The 300FT length in the description means shops can run multiple components from a single continuous strip, supporting batch-oriented cutting and edging where repeat parts share the same Rehau PVC edgebanding profile along their edges.

Why These Details Support Consistent Edging Results

The defined 15/16 inch by 3mm sizing in the SAP description 15/16X3M FLEX CP60227 LAC 300FT gives installers a predictable edge banding dimension, which helps with setup when aligning trimming operations and flush finishes on both faces of a board. The FLEX notation indicates a flexible PVC structure, so the Rehau PVC edgebanding can seat along the board edge without resisting the path, which supports consistent contact along the entire run during the edging process. The 300FT length allows longer continuous passes, which reduces interruptions from changing material and helps maintain a uniform appearance along cabinets or series of shelving parts edged from the same run. The manufacturer part number 301021-383 serves as a precise identifier, allowing shops to match this exact Rehau, Inc. PVC edge banding whenever they need to reproduce the same edge detail on follow-up work or future projects.

Common Questions About Rehau PVC Edgebanding 301021-383

Select Rehau PVC Edgebanding For Defined Edges

Rehau PVC edgebanding 301021-383 from Rehau, Inc. is identified as edge banding in its product class, so it is built to finish exposed board edges with a PVC perimeter. The SAP description 15/16X3M FLEX CP60227 LAC 300FT specifies a 15/16 inch wide, 3mm flexible PVC strip in a 300FT length, giving shops consistent dimensions for planning edge coverage across multiple components. The dedicated manufacturer part number 301021-383 lets you align current and future projects to this same Rehau PVC edgebanding profile when a matching edge detail is needed across casework or panel runs.