Rehau PVC edgebanding in model 301021-386 gives you a dedicated edge banding solution from Rehau, Inc. for finishing exposed panel edges in woodworking and cabinet projects where a PVC edge is specified. The product is identified as edge banding in the edgebanding category, so it is intended to cap and protect raw panel edges in assemblies that call for this material. The SAP description lists 15/16X3M FLEX CP21091 LAC 300FT, which indicates a 15/16 inch wide, flexible PVC edge banding supplied in a 300 foot length, supporting longer production runs or multiple cabinet jobs from a single roll. Using a branded Rehau PVC profile helps standardize appearance and edge treatment across projects where this specific manufacturer part number 301021-386 is required or documented in shop drawings or internal standards.
The SAP description 15/16X3M FLEX CP21091 LAC 300FT establishes that this edge banding is 15/16 inch wide, so it can cover standard panel edges that are near 3/4 inch thick while still leaving enough overhang for trimming equipment to flush the edge back to the panel. The description also identifies the material as flexible PVC, aligning it with typical edge banding processes used in woodworking and cabinet shops that run PVC on dedicated edge banders. Being categorized as edge banding means it is intended for the exposed sides of panels rather than surface lamination, which keeps it focused on protecting and finishing raw edges in assemblies where a PVC edge is called out.
The product name Rehau PVC Edgebanding, 301021-386, and the product class Edge Banding define this as a Rehau, Inc. solution for finishing panel edges in woodworking applications that specify PVC edging. Because it is categorized under Edgebanding, it is oriented toward cabinet, furniture, and general panel work where a separate edge treatment is needed at exposed edges. The 15/16X3M FLEX CP21091 LAC 300FT SAP description highlights a 15/16 inch wide flexible PVC strip, which lines up with typical use on panels near 3/4 inch thick found in casework and shelving. In practice, that width gives room for slight overhang above and below the panel during application, so trimming passes can restore a clean, straight line. With a total length of 300 feet identified in the SAP description, a single roll can support repetitive runs of doors, drawer fronts, or carcass parts in a small to mid-size project, which helps keep edge treatments consistent from part to part. The manufacturer part number 301021-386 ties this product directly to Rehau documentation and purchasing systems, so it suits shops that standardize on specific part codes for recurring work.
The edge banding designation confirms that this Rehau PVC product is intended to cover and protect raw panel edges, so it plays a direct role in how panels look and feel once installed in cabinets or furniture. Its 15/16 inch width, stated in the SAP description, creates a slight margin beyond common panel thicknesses, supporting a clean flush trim after the banding is bonded to the substrate. Because the SAP description specifies FLEX, the PVC construction is suited to normal edge banding handling, such as running through automated banders or manual edge application processes common in woodworking environments. The 300FT length means fewer roll changes across longer parts lists, which helps hold visual consistency when color or texture coordination is required on all exposed edges that call for this specific Rehau code. Using the clearly identified manufacturer part number 301021-386 simplifies internal communication between estimating, purchasing, and production when this exact PVC edgebanding is specified for repeatable outcomes.
Rehau PVC edgebanding 301021-386 is classified as edge banding, so it is used to finish and protect exposed panel edges in woodworking and cabinet projects that call for a PVC edge.
The 15/16X3M detail in the SAP description indicates a 15/16 inch wide PVC strip sized to cover panel edges near typical 3/4 inch thickness, leaving overhang for trimming to a clean finished edge.
The 300FT notation indicates a 300 foot roll length, which supports longer production runs or multiple cabinet jobs from a single roll, reducing changeovers during edge banding operations.
The manufacturer part number 301021-386 uniquely identifies this specific Rehau PVC edgebanding, which helps align purchasing, inventory, and shop drawings to the same PVC edge material.
The FLEX designation in the SAP description shows that this is a flexible PVC edgebanding, suitable for normal handling through woodworking edge banding processes on straight panel edges.
The combination of edge banding classification, 15/16 inch width, and 300 foot length aligns this Rehau PVC edgebanding with everyday cabinet, shelving, and panel edge finishing where PVC edges are specified.
This Rehau PVC edgebanding, identified by manufacturer part number 301021-386 and SAP description 15/16X3M FLEX CP21091 LAC 300FT, provides a clearly specified edge banding solution for woodworking and cabinet projects that call for a 15/16 inch wide flexible PVC edge. Its classification as edge banding and its 300 foot roll length support steady workflow on panel runs where a consistent Rehau PVC edge is desired. When your drawings or internal standards specify this exact Rehau PVC edgebanding, selecting this part number keeps material selection aligned with those documented requirements.
Sold In: 1 Roll