Rehau PVC edgebanding 301021-389 is a PVC edge banding that finishes exposed panel edges, giving cabinet and furniture projects a defined transition from surface to edge. The 15/16 inch width stated in the description covers typical 3/4 inch board edges with some overhang, allowing trimming back to a flush, straight edge. The 3mm thickness specified in the SAP-style description provides a substantial edge profile, which supports a solid visual line along doors, drawer fronts, or casework edges. The reference to FLEX in the description identifies this as a flexible edgebanding, so it can follow standard straight runs while handling typical shop curves used in modern panel construction. The CP60446 and LAC identifiers in the description define a specific decor and finish combination, which keeps color and surface appearance consistent across runs when the same code is ordered again for repeat jobs.
The 15/16 x 3mm dimension given for this Rehau PVC edgebanding defines how it sits during installation, with the width spanning the board edge and the thickness forming the edge profile ready for trimming. The FLEX term in the description shows that the strip is intended to bend along standard panel runs during an edgebanding pass, helping it seat against the substrate as it is applied. The PVC edge banding classification identifies it as an edge finishing material for panel construction, so it occupies the role of covering raw board edges where the core would otherwise be exposed. The specific CP60446 LAC decor coding allows installers to match this edging to the same coded surface selection when aligning edge appearance with panel faces specified to that code.
The product name Rehau PVC Edgebanding 301021-389 identifies this material as an edge banding solution for projects using panels that require PVC edges. The 15/16 inch width in the SAP description aligns with common cabinet-grade panel thicknesses, so it works along vertical case edges, door perimeters, or shelving fronts cut from those boards. The 3mm thickness indicated in the description makes the edge visually present on front-facing components, which suits higher-traffic or more visually prominent cabinet and fixture edges. The PVC edgebanding classification connects this product to woodworking and cabinet-building tasks where raw composite or panel edges are covered to match a selected finish. The CP60446 LAC decor reference ties it to a specific color and surface style, which matters when panels and edging are chosen to coordinate under that same code so edges blend into the overall design scheme.
The 15/16 x 3mm sizing of this Rehau edge banding supports repeatable trimming because the over-width coverage stated in the description gives a consistent margin to remove, helping installers work to the same edge reveal on multiple parts. The 300FT length described allows longer uninterrupted runs, reducing joint locations along cabinet sides or tall closet components and supporting smoother visual lines. The FLEX label in the SAP description indicates a flexible construction, which assists with maintaining contact between the PVC strip and the substrate as it is applied along straight or gently curved sections during the edging pass. The CP60446 and LAC decor and finish identifiers anchor a repeatable selection, meaning that when the same code is used again, the edges can track the same visual standard across replacement doors, added cabinets, or later phases of the same project.
Rehau PVC edgebanding 301021-389 is described as PVC edge banding, so it provides a synthetic edge finish suitable for covering exposed panel edges in woodworking projects.
Rehau PVC edgebanding 301021-389 uses a 15/16 inch width and 3mm thickness, giving coverage past typical 3/4 inch panels and creating a defined edge profile ready for trimming.
Rehau PVC edgebanding 301021-389 is labeled FLEX in the description, indicating a flexible strip that follows standard panel runs during application for consistent edge coverage.
Rehau PVC edgebanding 301021-389 lists CP60446 LAC, identifying a specific decor and finish combination so edges can visually coordinate with surfaces using that same code.
Rehau PVC edgebanding 301021-389 is described with 300FT length, providing extended continuous edging for larger cabinet or fixture projects with fewer splices.
Rehau PVC edgebanding 301021-389, classified as edge banding, suits panel-based cabinet, furniture, and fixture work where PVC edges are needed to finish exposed board edges.
Rehau PVC edgebanding 301021-389 brings a defined 15/16 x 3mm size, FLEX construction, and CP60446 LAC decor code together in one edge banding solution, supporting consistent edges across cabinet and panel projects. For runs that depend on repeatable sizing, a known finish code, and a 300FT length suited to extended edging passes, this PVC edge banding matches those needs so shop work can proceed with a clear, specified edging choice.
Sold In: 1 Roll