Rehau PVC edgebanding 301021-390 is a PVC edge banding designed to finish exposed panel edges with a consistent, work-ready surface. The 15/16 inch width covers standard panel thickness with a bit of tolerance, which helps when trimming flush after bonding. The 3mm thickness provides a substantial edge profile, supporting a solid feel at corners and along high-contact runs. The FLEX designation identifies this as a flexible material, which helps it follow gentle curves and handle inside or outside corners during fabrication. The CP60440 designation identifies the specific decorative design and color reference so matching to corresponding surfaces stays controlled from job to job. The embossed lacquer detail defines the surface texture and finish system, giving the banding a pre-finished look straight off the roll so panels do not require separate edge finishing steps.
The 15/16 inch width of the Rehau PVC edgebanding, 301021-390, gives installers enough material to cover panel edges and still trim back to a precise line, aiding visual alignment across doors and gables. The 3mm thickness adds a defined edge radius once processed, which supports uniform machining with common edgebanders or manual trimmers. The PVC material works as a thermoplastic edge banding, which supports heat-based bonding processes typically used in shop environments. The embossed lacquer finish arrives as the final decorative surface, so edges move from application to assembly without extra finishing passes, supporting straightforward workflow on cabinetry or other panel-based builds.
This Rehau PVC edgebanding, listed under manufacturer part 301021-390, is part of the edge banding product class, aligning it with panel and casework fabrication. The 15/16 inch by 3mm size targets edges on sheet goods typically used in cabinetry, fixtures, and similar woodworking projects. The flexible PVC construction suits operations where panels may include modest curves or where shops run mixed edge profiles within the same batch. The CP60440 decorative reference and embossed lacquer finish connect the edge band visually to complementary surfaces, supporting consistent appearance on doors, drawer fronts, and exposed carcass edges across a project.
The defined 15/16 inch width and 3mm thickness give machine operators fixed parameters for edgebander setup, which supports repeatable trimming and scraping passes from run to run. The PVC material type pairs with typical hot-melt bonding systems, which helps maintain predictable adhesion behavior along long cabinet or fixture edges. The FLEX characteristic of this Rehau edgebanding means the strip works with curves and corner transitions, helping reduce cracked or lifted edges on more complex layouts. The embossed lacquer surface provides a consistent texture and sheen, so finished pieces from different production days present the same edge appearance when installed together.
Rehau PVC edgebanding 301021-390 is described as 15/16 inch wide by 3mm thick, which guides panel edge coverage and trimming setup on edgebanders or manual tools.
The FLEX description on this Rehau PVC edgebanding indicates a flexible construction, helping the band follow gentle curves and transitions along cabinet or panel edges during installation.
The CP60440 designation on this edgebanding identifies the specific design and color reference, helping maintain consistent visual matching across doors, drawer fronts, and panels.
The embossed lacquer finish on this Rehau edgebanding defines texture and surface coating, providing a pre-finished decorative edge ready for use after bonding and trimming.
The 3mm thickness on this PVC edgebanding creates a substantial edge profile, supporting a solid feel and durable corner presence on cabinets and similar panel constructions.
This 15/16 inch by 3mm Rehau PVC edgebanding suits panel-based woodworking such as cabinets or fixtures where exposed edges need a coordinated, finished appearance.
Rehau PVC edgebanding 301021-390 combines a 15/16 inch width, 3mm thickness, and FLEX PVC construction to support controlled panel edge finishing. The CP60440 reference and embossed lacquer finish keep edges visually coordinated with matching surfaces. For runs where panel edges need a consistent, pre-finished PVC band, this edge banding aligns dimensions, material, and decorative detail for straightforward processing and installation on cabinetry and other panel-based work.
Sold In: 1 Roll