Rehau PVC edgebanding gives a defined edge treatment using PVC material, so exposed panel edges gain a consistent, manufactured look that matches modern casework expectations. The 15/16 inch width from the SAP description "15/16X3M FLEX CP20726 LAC 300FT" covers typical panel thickness with a small overhang, which provides enough material for trimming flush on both faces during fabrication. The PVC construction described in the product name "Rehau PVC Edgebanding, 301021-392" supports uniform machining with standard edge-banding equipment, so settings and passes stay predictable along the run. The manufacturer designation "FLEX" in the SAP description indicates a flexible format, which helps the band follow straight runs and gentle curves on cabinets or furniture components. The 3m reference in the SAP description identifies the nominal width format, which aligns with common edgebander setups that expect metric coil widths while still serving inch-based panel work. The 300ft length in the SAP description provides an extended continuous run, which limits coil changes on repetitive jobs.
The SAP description "15/16X3M FLEX CP20726 LAC 300FT" provides the working size and format, so installers can plan machine settings around a 15/16 inch wide PVC band. That width gives enough coverage on typical panel edges to allow a uniform trim pass on both faces, which supports a flush, chip-free finish after routing or scraping. The 3m reference ties the band to a metric-based width format often used in automated edge-banding equipment, which helps align tooling and guide settings with existing machine scales. The 300ft coil length allows the same setup to run across many cabinets or components, which supports consistent edges from the first part to the last in a batch run.
The product class "Edge Banding" and category "Miscellaneous|Edgebanding" position this Rehau PVC edgebanding as trim for panel edges in woodworking environments served by Wurth Baer Supply, such as cabinetry, casework, and other panel-based assemblies. The PVC construction called out in the product name supports application on manufactured wood or similar sheet goods where exposed edges need a finished appearance. The 15/16 inch width from the SAP description "15/16X3M FLEX CP20726 LAC 300FT" suits panels near 3/4 inch nominal thickness, since it extends slightly past each face for later trimming. That proportion lets shops standardize one edge band size across many common cabinet sides, shelves, or dividers, which simplifies inventory and machine setups. The FLEX designation in the SAP description indicates that the material is designed to flex during application, allowing it to follow edge geometry typical of straight carcass components and gentle radius elements in furniture or commercial fixtures.
The manufacturer part number 301021-392 uniquely identifies this Rehau PVC edgebanding, so repeat orders bring the same width, finish designation CP20726 LAC, and flexible format for consistency from project to project. The combined description "Rehau PVC Edgebanding, 301021-392" and SAP designation "15/16X3M FLEX CP20726 LAC 300FT" allow production teams to tie machine programs, color references, and job documentation directly to a specific coil type. The 300ft length described in the SAP text supports extended runs, which helps maintain a uniform look across banks of cabinets or large installations without mixing different coil lots during a job. The flexible PVC construction implied by the terms "PVC Edgebanding" and "FLEX" works with standard edge-banding processes commonly used in woodworking shops supplied by Wurth Baer Supply, so trim, scrape, and buff stages can be set once and replicated reliably.
Rehau PVC Edgebanding 301021-392 is an edge banding product in the Miscellaneous|Edgebanding category, so it is used to cover and finish exposed panel edges in woodworking applications.
The SAP description "15/16X3M FLEX CP20726 LAC 300FT" shows a 15/16 inch width, providing coverage past both faces of typical panels for trimming to a flush finished edge.
The SAP description states 300ft length, giving enough continuous material for extended production runs and helping keep edge appearance consistent across multiple parts.
The term FLEX in "15/16X3M FLEX CP20726 LAC 300FT" indicates a flexible PVC format, helping the band follow straight and gently curved edges during edge-banding operations.
The 15/16 inch dimension gives slight overhang on a typical panel, allowing trimming tools to cut back to a clean, flush edge without exposing the core material.
The manufacturer part number 301021-392 uniquely identifies this Rehau PVC edgebanding, supporting accurate reordering and consistent matching across projects and production batches.
Rehau PVC edgebanding 301021-392, defined by the SAP description "15/16X3M FLEX CP20726 LAC 300FT," combines a 15/16 inch width, flexible PVC construction, and 300ft length to support efficient edge treatment. Those details let shops align machine programs, trim setups, and job documentation around a single, clearly identified Rehau edge banding. For cabinet, casework, or other panel-based work supplied through Wurth Baer Supply, selecting this specific manufacturer part number ties projects to a repeatable, documented edge solution.
Sold In: 1 Roll