Rehau PVC edgebanding 301021-393 gives you a defined PVC edge banding solution for closing off exposed board edges on furniture parts, cabinet components, and other panel work where a PVC edge is specified. The 15/16 reference in the SAP description 15/16X3M FLEX CP40867 LAC 300FT indicates coverage for typical panel thicknesses in that width range, so you can work standard case and shelf material without leaving raw substrate visible. The 3M reference in the same description identifies the 3 mm nominal edgeband thickness, which provides a substantial edge profile that helps protect the panel edge in everyday use. The FLEX notation points to a flexible PVC construction, which lets the band conform to normal straight runs and gentle curves during edgebanding operations and reduces the risk of cracking at typical cabinet and furniture transitions.
The SAP description 15/16X3M FLEX CP40867 LAC 300FT defines a nominal 15/16 inch wide, 3 mm thick flexible PVC edgeband, so your edgebander can cover standard panel thickness with enough overhang for trimming. The 3 mm thickness builds a solid edge that stands up well during trimming and finishing passes. The FLEX characteristic referenced in the description supports smooth feeding through conventional automatic or manual edgebanding equipment on cabinet and furniture components. The continuous length identified by 300FT in the same description supports efficient setup on production edgebanders or extended bench runs, reducing stops between parts on jobs that repeat the same panel dimensions.
The product is identified as Rehau PVC Edgebanding, 301021-393, placing it clearly in the Edge Banding class for cabinet and furniture work where PVC edges are needed. The 15/16X3M designation in the SAP description means the strip is proportioned for standard panel thicknesses, giving enough width to cover the face and allow trimming without exposing the core material. That same 3 mm thickness gives the edge a defined, substantial look that suits many cabinet carcasses, shelves, and furniture components using engineered panels. The FLEX notation in 15/16X3M FLEX CP40867 LAC 300FT indicates a flexible PVC material, which supports routing this edgeband along typical straight cabinet sides and modest contours found in everyday casework layouts. As part of Wurth Baer Supply's woodworking-oriented assortment, this edge banding fits naturally into shop workflows that use engineered panels in cabinet, furniture, and interior build-outs.
The Manufacturer Part # 301021-393 from Rehau, Inc. gives you a precise identifier, so once this PVC edge profile is dialed in on your edgebander, you can reference the same number to repeat fit and appearance across jobs. The 15/16 width in the SAP description 15/16X3M FLEX CP40867 LAC 300FT provides consistent coverage for most case and shelf thicknesses, helping you hold the same trimming program without constantly adjusting for edge width. The 3 mm thickness in that same description offers a stable edge for trimming knives or flush-routing, which supports clean, repeatable results at machine speed. The FLEX property called out in the description lets the band track reliably along normal panel edges, which helps reduce rework from chipping or edge fracture in everyday cabinet and furniture production. The 300FT reference indicates an extended length well suited to repeat runs, supporting consistent output across larger batches formed from the same edgeband roll.
Rehau 301021-393 is a PVC Edgebanding in the Edge Banding product class, so it is used to finish and protect exposed panel edges on cabinets, furniture, and similar woodworking projects.
The SAP description 15/16X3M FLEX CP40867 LAC 300FT identifies a 15/16 inch nominal width, giving coverage across typical panel thicknesses with room for trimming to a clean finished edge.
The 3M in the SAP description denotes a 3 mm edgeband thickness, providing a substantial PVC edge that supports clean trimming and a pronounced profile on cabinet and furniture components.
The FLEX term in 15/16X3M FLEX CP40867 LAC 300FT indicates flexible PVC material, which lets the band follow standard straight runs and gentle curves on panel edges during edgebanding operations.
The 300FT reference in the SAP description points to a long continuous length, which supports longer production runs or multiple cabinet jobs without frequent material changes on the edgebander.
The Manufacturer Part # 301021-393 from Rehau, Inc. provides a consistent identifier so shops can match the same PVC edgeband profile and appearance across repeat projects.
Rehau PVC edgebanding 301021-393, defined by the SAP description 15/16X3M FLEX CP40867 LAC 300FT, gives you a 15/16 inch wide, 3 mm thick flexible PVC edge band tailored to cabinet and furniture panel work. The Rehau, Inc. branding and specific Manufacturer Part # 301021-393 allow you to specify this same edgeband whenever that width, thickness, and flexible PVC construction are needed again. Selecting this product through Wurth Baer Supply aligns edge treatment with the woodworking-focused inventory that many cabinet and millwork shops already rely on.
Sold In: 1 Roll