Rehau PVC edgebanding 301021-395 is a flexible edge banding from Rehau, Inc. in the Edge Banding product class, built for finishing exposed panel edges with a consistent PVC surface that helps protect raw substrate and present a uniform edge line on cabinets and casework. The 15/16 inch width described in the SAP description 15/16X3M FLEX CP21095 LAC 300FT gives coverage that works with panels around three-quarters of an inch thick while allowing a slight overhang for trimming, which supports a flush, professional-looking edge after machining. The 3M FLEX detail in the same description shows that this is a flexible PVC material, so it conforms more easily along straight runs and gentle curves, which can reduce effort when edging parts with modest radiuses. The 300FT length noted in the SAP description provides a continuous run suitable for larger jobs, which helps keep color and finish consistent across multiple cabinet components.
The SAP description 15/16X3M FLEX CP21095 LAC 300FT indicates a 15/16 inch wide PVC edgebanding, giving coverage that spans the thickness of standard cabinetry panels with enough extra width for trimming passes, which helps achieve tight, clean edges after machining. The same description calls out a 300FT length, which supports extended production runs on edgebanders or hand-applied jobs without frequent roll changes, helping maintain even feed conditions and visual consistency. The FLEX wording in the description indicates a flexible PVC construction, so the edge banding works well with typical edgebanding equipment and can follow moderate curves or slight panel deviations, which is useful when finishing a mix of straight cabinet components and gently curved elements in the same project.
The category listing Miscellaneous|Edgebanding places Rehau PVC Edgebanding, 301021-395 squarely in the edge banding segment used across cabinetry and woodworking, so it suits projects where exposed board edges need a PVC finish instead of raw substrate. With its 15/16 inch width called out in the SAP description 15/16X3M FLEX CP21095 LAC 300FT, this banding aligns with common casework panel thicknesses, allowing installers to cover the full edge height on cabinet sides, shelves, and fronts while leaving enough material to trim back to a flush face. The Edge Banding product class classification confirms its role on the edge rather than broad surfaces, making it a practical choice anywhere a PVC perimeter is required around melamine, laminate, or similar panel materials in shop-built components.
The manufacturer part number 301021-395 consistently tied to the product name and SAP description gives production teams a single reference point, so reorders match prior jobs and maintain continuity when a project expands or needs service parts. The 300FT length referenced in 15/16X3M FLEX CP21095 LAC 300FT supports running many cabinet parts from a single roll, which helps keep color and finish uniform across doors, drawer fronts, and carcass edges while simplifying material staging near the edgebander. The FLEX PVC description indicates a flexible banding profile, so feed behavior remains predictable on typical edgebanding machinery, supporting stable glue lines and smoother trimming with less tendency for chipping at corners. Combined, these details help shops plan consistent edging workflow, from initial setup through final pass, while tying material identity directly back to Rehau PVC edgebanding 301021-395 for future reference.
Rehau PVC Edgebanding 301021-395 is PVC edge banding in the Edge Banding product class, used to finish exposed panel edges so cabinet and furniture parts present a consistent, protected edge.
Rehau PVC Edgebanding, 301021-395 is described as 15/16X3M FLEX CP21095 LAC 300FT, indicating a 15/16 inch width that covers typical cabinet panel thickness with extra material for trimming to a flush finish.
The SAP description lists 300FT, providing a long roll suitable for running many cabinet or casework parts from a single batch, which helps maintain color continuity across a project.
The description 15/16X3M FLEX CP21095 LAC 300FT identifies it as FLEX PVC edgebanding, so it conforms well along straight runs and moderate curves during edging operations.
The product is branded Rehau, Inc., giving shops a known manufacturer reference when matching specifications, project standards, or existing installations using Rehau PVC edgebanding.
The manufacturer part number 301021-395, repeated in the product name and SAP description, simplifies reordering, inventory tracking, and matching jobs that call for this exact PVC edgebanding.
Rehau PVC Edgebanding, 301021-395 from Rehau, Inc., defined in the SAP description as 15/16X3M FLEX CP21095 LAC 300FT, provides a flexible 15/16 inch PVC edge banding sized for standard panel thickness and extended runs. At Wurth Baer Supply, this Edge Banding product class option aligns with shop-focused workflows, giving installers and fabricators a clearly identified manufacturer part number 301021-395 for consistent reorders. Put this 300FT Rehau PVC edgebanding into your cabinet or casework process wherever a matching PVC edge finish and repeatable material identity are important across multiple components.
Sold In: 1 Roll