Rehau PVC edgebanding 301021-398 is a PVC edge banding product that finishes exposed panel edges so cabinet and furniture parts present a clean, professional edge rather than raw core. The 15/16 inch width covers typical 3/4 inch panels with some overhang, which gives room for trimming without exposing the substrate. The 3mm thickness adds a solid edge profile, helping panel edges feel more substantial in day-to-day use. The flex construction described in the SAP text supports working this banding around straight runs where a pliable PVC edge is useful for consistent adhesion. The CP60431 reference and embossed lacquer description identify a specific decorative and protective surface, so edges match the intended design series and have a finished look that aligns with the chosen board. The 300ft length supports longer production runs or multiple jobs from a single roll.
The 15/16 inch width on Rehau PVC edgebanding 301021-398 gives installers working room to align the band to the panel face and then trim back to a flush edge, which supports tight seams along cabinet sides and doors. The 3mm thickness creates a noticeable edge radius after trimming and finishing passes, which can improve the transition between face and edge on panels. The embossed lacquer surface identified in the SAP description provides a defined finish layer on the PVC, so the installer is working with a pre-finished edge that visually completes melamine or laminate panels in one step. The 300ft roll length supports setting up equipment once and running longer sequences without frequent material changes.
This product is identified as Rehau PVC edgebanding in the edge banding category, so it is suited to covering exposed edges on panel-based cabinet and furniture components. The 15/16 inch width pairs well with typical 3/4 inch substrate thickness used in many woodworking and cabinet jobs, giving installers a familiar dimension for everyday shop setups. The 3mm thickness, referenced in the SAP description, supports applications where a more substantial edge is preferred, such as higher-touch cabinet doors or shelving fronts that benefit from a thicker edge detail. The CP60431 embossed lacquer designation points to a specific surface style from Rehau, which is useful when aligning edges to decorative board patterns that use the same or coordinated finish.
The dimensional combination of 15/16 inch width and 3mm thickness in Rehau PVC edgebanding 301021-398 supports repeatable machine settings, since these values are consistent from roll to roll under the same part number. The flex description in the SAP text indicates a flexible PVC structure, which helps the band conform to straight panel edges under pressure from edgebanders or hand rollers. The embossed lacquer surface called out by CP60431 and the lacquer reference provides a finished layer that remains consistent across the 300ft length, so visual results are uniform across a run of doors, drawer fronts, or case parts. The 300ft roll size also supports planning production sequences by linear footage, helping shops allocate a single part number to a defined group of parts without changing material mid-run.
Rehau PVC edgebanding 301021-398 is described as 15/16 inch wide and 3mm thick, so it covers standard 3/4 inch panels with room for trimming while providing a thicker edge profile.
The flex wording in the SAP description indicates a flexible PVC construction, which helps the band follow straight panel edges under pressure from edgebanding equipment.
The SAP description specifies 300ft, so one roll supports longer runs of doors, drawer fronts, or case parts without changing material as frequently.
The CP60431 embossed lacquer wording identifies a particular surface style and lacquered texture, which helps align edge appearance with matching decorative board designs.
The SAP description and product name identify it as Rehau PVC edgebanding, placing it in the edge banding product class for finishing exposed panel edges.
This edgebanding uses manufacturer part number 301021-398, which ties directly to the 15/16 inch by 3mm flex CP60431 embossed lacquer 300ft configuration.
Rehau PVC edgebanding 301021-398 combines a 15/16 inch width, 3mm thickness, and CP60431 embossed lacquer surface in a single 300ft roll, giving shops a defined, repeatable edge solution for panel work. The flex PVC construction described in the SAP text supports consistent application on straight panel edges during cabinet and furniture production. Using this specific manufacturer part number 301021-398 ties your runs to the same width, thickness, and finish each time, which supports uniform visual results across doors, drawer fronts, and case parts on related projects.
Sold In: 1 Roll