Rehau PVC edgebanding 301021-402 is a PVC edge banding that covers exposed board edges so cabinets and panels present a finished, uniform edge. The 15/16 inch width gives coverage beyond typical 3/4 inch panels, which helps installers trim back to a crisp, flush line after bonding. The 3mm thickness provides a substantial edge profile, giving the edge a solid look that matches thicker contemporary fronts. The FLEX designation in the SAP description identifies a flexible PVC construction, allowing the tape to follow mild curves or small alignment changes along a run. The CP41293 reference in the description serves as an appearance or program code, helping shops repeat the same visual look across multiple jobs. The EMB and LAC notation indicates an embossed, lacquered surface that provides a textured, finished face along the edge so casework reads consistently from panel face to edge.
This Rehau, Inc. PVC edge banding is specified at 15/16 x 3mm in the SAP description, so installers know they are working with a strip that overhangs standard 3/4 inch panels and provides a 3mm edge profile. That extra width simplifies alignment because the banding can be centered quickly and trimmed back after bonding rather than aligned flush on the first pass. The 3mm thickness described in the product data affects trimming and scraping, guiding shops to use settings appropriate for thicker banding to avoid cutting too deep. The 300FT roll length referenced in the SAP description supports feeding through edgebanders for multiple cabinet parts in a row, which helps maintain a consistent edge appearance across doors, drawer fronts, and case components.
This edge banding sits in the Edgebanding product class and Miscellaneous|Edgebanding category, placing it directly in typical cabinet and casework workflows. The PVC material referenced in the product name and description suits board edges on furniture components, shelving, and cabinetry where a durable, uniform edge is needed. The 15/16 inch width listed in the SAP description makes it well matched to covering exposed edges on standard 3/4 inch panels with enough overhang for trimming, which is common in cabinet box construction. The 3mm thickness gives the edge a more pronounced profile, aligning with projects that call for a thicker, European-style edge detail. The FLEX notation signals a banding that can handle gentle curves or small alignment shifts, so it can follow slightly irregular edges commonly found in shop-built components. The CP41293 EMB LAC identification helps shops tie this banding to specific board or laminate programs, keeping visual continuity between panel faces and edges on repeat projects.
The manufacturer part number 301021-402 gives shops a repeatable reference, so reorders pull the same PVC edge banding that matched earlier cabinet runs. That consistency reduces color or texture variation between batches when using the CP41293 EMB LAC finish identified in the SAP description. The 300FT length is suited to production-style workflows where many edges are processed in one session, limiting roll changes that can interrupt machine setups. The 3mm thickness influences tooling and feed setups on edgebanders and trimmers, supporting stable cuts and smoother scraping when settings are matched to the stated dimension. The FLEX PVC structure referenced in the description helps the banding conform to panel edges without excessive internal stress, which supports a smooth, continuous bond line along the edge. The 15/16 inch width allows installers to work with a margin on both sides of a 3/4 inch panel, which is useful for keeping edges fully covered even when panels vary slightly in thickness.
The edgebanding is specified in the SAP description as 15/16 x 3mm, giving a slight width overhang on 3/4 inch panels and a 3mm thick edge profile for a more substantial finished edge.
The FLEX designation in the SAP description indicates flexible PVC, allowing the strip to follow mild curves or small alignment changes so long runs maintain continuous edge coverage.
The CP41293 EMB LAC text in the SAP description identifies an embossed, lacquered surface appearance, helping shops match this edge visually with other components using the same finish.
The 300FT length listed in the SAP description supports longer production runs on an edgebander, reducing roll changes and helping maintain consistent edges across multiple cabinet parts.
The 3mm thickness noted in the SAP description provides a pronounced edge profile that suits contemporary cabinet designs where the edge is a visible design element.
The 15/16 inch width provides working overhang beyond standard 3/4 inch panels, allowing installers to trim back to a clean, flush edge without exposed substrate.
This Rehau PVC edgebanding, identified as manufacturer part 301021-402 with a 15/16 x 3mm FLEX CP41293 EMB LAC 300FT specification, gives shops a defined size, material, and finish profile for cabinet and panel edges. The combination of 15/16 inch width and 3mm thickness supports trim-to-fit workflows on 3/4 inch stock, while the embossed, lacquered surface and flexible PVC construction help edges track panel lines cleanly. For projects that call for a consistent, repeatable Rehau edge treatment, this specific PVC edge banding matches that role across cabinet, furniture, and casework runs.
Sold In: 1 Roll