Rehau PVC edgebanding 301021-404 is a PVC edge banding that covers and protects exposed panel edges, so cabinet and furniture projects present a finished look instead of raw board. The 15/16 in. width works with common 3/4 in. panels, giving a slight overhang for trimming to a tight, flush line. The 3 mm thickness adds a substantial edge profile, which helps resist everyday knocks on cabinet fronts and work surfaces in busy woodworking environments. The flexible construction described as FLEX lets the band follow gentle curves and straight runs, which supports consistent results across mixed layouts. The CP21117 reference identifies a specific design line, helping shops repeat a look across multiple jobs. The embossed lacquer detail provides a textured, finished surface, so the edge can visually coordinate with matching decorative materials in the project.
This Rehau PVC edge banding in 15/16 in. by 3 mm format presents a predictable strip size for edgebanders and trimming tools, so setups stay repeatable across jobs. The combination of 15/16 in. width and 3 mm thickness lets equipment operators dial in standard guides, pressure rollers, and trimming heads for 3/4 in. casework without changing to unusual settings. The flexible PVC construction described as FLEX helps the band lay down smoothly around cabinet components, which supports even adhesive transfer along the full edge. The 300 ft roll length referenced in the SAP description serves extended runs on production equipment, so operators can run multiple parts with the same edge material before loading a new roll.
This Rehau PVC edgebanding 301021-404 serves as edge treatment on panels in cabinet, furniture, and other woodworking projects that use 3/4 in. material. The 15/16 in. width works around doors, drawer fronts, shelves, and case sides where a slight overhang is trimmed back to a flush line. The 3 mm thickness gives a more substantial edge than thin tape-style bands, which suits applications where edges see frequent contact, such as kitchen and commercial cabinetry. The FLEX PVC construction lets the strip follow straight edges and gentle curves, so it can be applied along longer cabinet runs or shaped components specified in the same project. The CP21117 embossed lacquer surface ties the edge to a defined decorative design, which supports consistent appearance on jobs calling for that specific look.
The defined 15/16 in. by 3 mm size helps edgebander operators set fences, pressure, and trimming tools once and then process multiple parts with minimal adjustment, which aids throughput on shop floors. The thicker 3 mm profile gives trimming cutters more material to work with, helping them produce a clean radius or square edge without cutting into the panel face. The flexible PVC noted as FLEX allows even pressure from rollers and clamps around cabinet parts, supporting reliable bonding along the full edge. The embossed lacquer CP21117 surface provides a ready-to-use finish on the band, so the edge presents a consistent texture and sheen with other materials tied to that reference. The 301021-404 part number keeps this configuration clearly identified, which helps shops standardize their edge material for repeat projects and service work.
Rehau PVC edgebanding 301021-404 is described as 15/16 in. wide by 3 mm thick, which suits edging applications on 3/4 in. panels with a trim-to-flush workflow.
The FLEX PVC construction lets the edgebanding follow straight runs and gentle curves, supporting smooth application and even pressure along cabinet and furniture edges.
CP21117 embossed lacquer identifies a specific textured, lacquered surface, so the edge appearance aligns with decorative materials using the same CP21117 reference.
The 3 mm thickness provides a more substantial edge profile, helping the band resist everyday contact on cabinet doors, drawer fronts, and high-use panels.
The 15/16 in. width gives a slight overhang on 3/4 in. panels, allowing trimming tools to cut back to a flush, clean edge without exposing core material.
The 300 ft length described in the SAP detail supports extended production runs, reducing roll changes and keeping edgebanding operations moving efficiently.
The Rehau PVC edgebanding 301021-404 combines a 15/16 in. by 3 mm format, FLEX PVC construction, and CP21117 embossed lacquer surface to support consistent cabinet and furniture edging results. The defined dimensions, finish reference, and 300 ft roll detail allow shops to plan runs, standardize setups, and match repeat work around the same edge profile. For projects built around this CP21117 look and a robust 3 mm edge, this Rehau PVC edge banding gives a clearly identified option to integrate into production.
Sold In: 1 Roll