Rehau PVC edgebanding 301021-507 is a PVC edge banding product that covers and finishes exposed panel edges, which helps create a uniform, workable edge on casework and cabinetry components. This Rehau, Inc. edgebanding is identified as product 301021-507, so shops can match it consistently across jobs and reorders. The SAP description lists 15/16 x 3mm FLEX CP40097 LAC 300FT, tying this edgeband to a 15/16 inch wide, 3mm thick flexible strip that suits standard panel thicknesses. The 300 foot length in the SAP description supports longer production runs from a single roll in a busy shop environment. The product is classified as Edge Banding in the Edgebanding category, aligning it with edge finishing work on laminated or similar board materials.
This Rehau PVC Edgebanding, 301021-507, is described as 15/16 x 3mm FLEX CP40097 LAC 300FT, so installers know they are working with a 15/16 inch wide strip that suits common 3/4 inch panel edges. The 3mm thickness creates a robust edge profile that can be trimmed and profiled while still presenting a solid appearance once finished. The FLEX description indicates a flexible PVC construction that handles normal feeding, bending around typical cabinet layouts, and routing after bonding. The 300 foot length supports setting up a run on an edgebander or manual workflow without frequent roll changes, which helps maintain consistent feed and edge quality throughout a project.
The SAP description 15/16 x 3mm identifies this Rehau PVC Edgebanding, 301021-507, as a strip sized for covering the edge of panels in woodworking and cabinet projects. The 15/16 inch width gives a slight overhang beyond standard panel thicknesses, supporting precise trimming on cabinet sides, shelves, and fronts. The 3mm thickness pairs well with applications where a more substantial edge detail is preferred, such as on frequently handled door and drawer fronts. Because the product class is Edge Banding and the category is Edgebanding, it sits naturally in workflows that finish exposed substrate edges after cutting or machining panel components. The FLEX notation allows shops to route this edgeband through typical edge processing steps without fighting a rigid profile.
This Rehau, Inc. edgebanding uses the specific manufacturer part number 301021-507, which lets purchasing and production teams specify the same edge material across different jobs for consistent appearance and fit. The CP40097 LAC code gives another precise identifier, supporting alignment with coordinated surfaces or existing library references in the shop. The 300FT length in the SAP description means that once the roll is loaded, multiple cabinets or fixtures can be processed before changing material, helping maintain a steady setup on an edgebander. The combination of 15/16 inch width and 3mm thickness means trimming tools have enough material to work with while still yielding a clean, proportional edge on standard casework components. Since the product is Rehau PVC edgebanding, 301021-507, it integrates logically into edge finishing steps after cutting, boring, and machining panels.
Rehau PVC Edgebanding 301021-507 is described as 15/16 x 3mm, providing a 15/16 inch wide, 3mm thick strip that suits edging standard panel components.
This Rehau PVC edgebanding is listed as 300FT, giving 300 feet of material to support extended edge runs in a production environment.
The word FLEX in the SAP description indicates a flexible PVC construction, which helps the strip feed and conform during normal edge banding operations.
The 301021-507 manufacturer part number identifies this exact Rehau PVC edgebanding, helping purchasing and production call out the same material every time.
The CP40097 LAC code in the description ties this edge banding to a specific program or finish reference, supporting consistent matching with related surfaces.
The 3mm thickness gives a substantial edge profile, providing enough material for trimming while delivering a solid, defined edge on cabinet parts.
Rehau PVC edgebanding 301021-507, described as 15/16 x 3mm FLEX CP40097 LAC 300FT, aligns with edge finishing tasks on cabinet and woodworking projects that use standard panel sizes. The defined width, thickness, and length support repeatable runs in a professional shop. Choosing this specific Rehau manufacturer part number keeps ordering and production aligned around one consistent edge profile and appearance for ongoing jobs.
Sold In: 1 Roll