Rehau PVC edgebanding 301021-566 is a PVC edge banding from Rehau, Inc. that covers and protects raw panel edges, so cabinet and furniture projects present a finished appearance and shield exposed edges during daily use. The product is classified as Edge Banding in the Edgebanding category, so it is suited to edging roles on wood-based panels where a dedicated edge treatment is required. The SAP description 15/16X3MM FLEX CP40570 LAC 300FT states a 15/16 inch width and 3mm thickness in a flexible PVC construction, so it matches common panel thicknesses while allowing the material to conform along straight runs and gentle curves. The 300FT length in the SAP description indicates a continuous long run, so larger jobs can be handled with fewer splices along cabinet sides, shelves, or door edges.
The SAP description 15/16X3MM FLEX CP40570 LAC 300FT defines the edgebanding as approximately 15/16 inch wide, so it spans a typical panel thickness with enough margin for clean trimming after bonding. The 3mm thickness noted in the same description creates a pronounced edge, so front-facing edges on cabinets or furniture components read as robust once the banding is applied and trimmed. Being part of the Edgebanding category and Edge Banding product class, this Rehau PVC edgebanding fits standard edge-banding equipment and hand-application workflows that are set up for PVC strips of similar dimensions.
The Brand entry Rehau, Inc. and Product Class Edge Banding identify this item as a dedicated edging solution for woodworking, so it is suited to situations where raw board edges need a durable facing. Its place in the Miscellaneous|Edgebanding category positions it among panel-edge products, so it pairs naturally with cabinet, furniture, and casework components built from sheet goods. The SAP description 15/16X3MM FLEX CP40570 LAC 300FT ties the width close to common panel dimensions, so installers can run it along vertical cabinet sides, horizontal shelves, and door edges using typical trimming tools without unusual setup changes. Because the same description confirms a 300FT roll length, shops working on repetitive parts can edge many components from a single roll, keeping appearance consistent across all visible edges on a project.
The product name Rehau PVC Edgebanding, 301021-566 and the Manufacturer Part # 301021-566 give a precise identifier, so repeat purchases match earlier installations when an identical edge is needed on add-on cabinets or replacement doors. The 3mm thickness in the SAP description provides a defined shoulder at the edge, so trimming operations yield a clean transition between the edgebanding and panel face that stands up visually on front edges. The FLEX notation within 15/16X3MM FLEX CP40570 LAC 300FT highlights a flexible material, so feeding the strip through edge-banding equipment or around gentle curves stays predictable, reducing the chance of edge lift during handling. As an Edge Banding product from Rehau, Inc., it slots into established PVC edgebanding workflows, so fabricators can rely on familiar processes to obtain a uniform edge line across cabinets and furniture.
Rehau PVC edgebanding 301021-566 is an Edge Banding product in the Edgebanding category, so it is designed specifically to cover and finish exposed panel edges in woodworking projects.
The SAP description 15/16X3MM FLEX CP40570 LAC 300FT states a 15/16 inch width and 3mm thickness, so it suits common panel thicknesses while creating a substantial, trim-ready edge profile.
The FLEX wording in the SAP description indicates a flexible PVC construction, so the strip can follow straight edges and modest curves without resisting typical edge-banding equipment or hand application.
The SAP description lists 300FT, so there is enough length for edging multiple cabinets or furniture components while keeping edge appearance consistent across a project run.
The Brand field lists Rehau, Inc., so this PVC edgebanding comes from a dedicated edgebanding manufacturer serving woodworking and panel-based construction applications.
The product uses the Manufacturer Part # 301021-566 and the name Rehau PVC Edgebanding, 301021-566, so shops can reference the same identifiers when matching previous jobs.
Rehau PVC edgebanding 301021-566 combines a 15/16 inch width, 3mm thickness, and flexible PVC construction as detailed in the SAP description 15/16X3MM FLEX CP40570 LAC 300FT, so it fits panel-edge applications that need a defined, trim-ready edge. As an Edge Banding product from Rehau, Inc. in the Edgebanding category, it is suited for cabinet, furniture, and general woodworking projects where raw panel edges should match the finished faces. For projects that specify PVC edge banding with these dimensions, this 301021-566 part number provides a consistent reference for ongoing and repeat work.
Sold In: 1 Roll