Rehau PVC edgebanding 301021-572 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so the raw core is covered and protected during everyday use. The 15/16 x 3mm FLEX designation identifies it as a flexible strip sized for panels that need edge coverage close to a full 1 inch, giving you enough height to wrap typical board thicknesses without leaving exposed substrate. The CP20118 LAC detail in the description identifies a specific finish and look within the Rehau system, which helps maintain a consistent appearance when used across multiple components in the same project. The 300FT length notation defines this as a long-run solution that supports larger cabinet or fixture jobs without frequent roll changes, which reduces interruptions at the edgebander and keeps production flowing.
The 15/16X3MM dimensions in the SAP description describe a strip sized for standard woodworking panels, giving enough overhang for trimming while still sitting close to panel height for efficient machining. The 3mm thickness affects how the edge routes and flush-trims, providing a more pronounced edge profile that holds up through normal handling on cabinet fronts and casework. The FLEX designation shows the material is formed for bending around edges without cracking, so installers can apply it to straight cabinet runs and moderate contours with consistent pressure. The 300FT length provides extended uninterrupted material, which supports continuous feeding into edgebanding equipment and reduces time spent stopping to reload during larger jobs.
The category listing as Edgebanding defines this Rehau PVC edge banding as a finishing strip for cabinet, furniture, and general woodworking panels where exposed edges need to be closed. The 15/16 height works with common sheet goods, so operators can apply it along case sides, shelving, and door edges without changing to multiple sizes for similar thickness materials. The 3mm thickness gives an edge that reads more like a solid component once trimmed, which suits higher-traffic faces such as drawer fronts and end panels. The FLEX characteristic indicated in the description supports smooth wrapping along long cabinet runs and transitions, keeping the edge material seated as it is pressed into place.
The PVC material, identified by the PVC edgebanding classification in the product name, is suited to typical interior woodworking environments where cabinets and fixtures are used daily. The CP20118 LAC portion of the description ties this edgebanding to a specific finish family from Rehau, so fabricators working from design schedules that specify RU301021-572 or 301021-572 can match that callout exactly in production. The 300FT notation signals that this edge banding is set up for extended runs, letting shops feed multiple cabinet sections or an entire small project from one continuous length, which supports consistent color and edge appearance across all pieces.
The 15/16X3MM sizing is central to how this PVC edge banding behaves at the machine and at the bench, because that height and thickness dictate how much material is available for trimming and how bold the final edge presents. Using a 15/16 tall band on standard panels leaves a slight margin above and below the edge line, which gives trimmers enough stock to cut flush without risking a visible gap along the core. The 3mm thickness builds a more substantial edge that can visually balance door and drawer faces, which is helpful wherever designers call for thicker-looking edges without changing the core board.
The FLEX marking in the description highlights that this Rehau edgebanding is configured for flexibility, so it conforms along the edge during application instead of resisting the contour of the substrate. That improves how the banding seats under pressure rollers on an edgebander and helps maintain contact along the entire run. The specific manufacturer part number 301021-572, echoed in the web description as RU301021-572, gives shops and installers a consistent reference when reordering, which supports long-term projects or future maintenance where edge repairs must visually match existing components.
Rehau 301021-572 is a PVC edgebanding in the edge banding product class, so it is used to finish and protect exposed edges on cabinet, furniture, and other woodworking panels.
The SAP description 15/16X3MM defines the strip as approximately 15/16 inch high and 3mm thick, which sets how it covers panel edges and how the final edge profile appears after trimming.
The FLEX notation indicates a flexible PVC formulation, so the edgebanding can follow straight runs and gentle curves during application, supporting smoother installation along cabinet and fixture edges.
The 300FT detail indicates a long continuous length, which supports running multiple panels or full cabinet sets without frequent material changes, keeping edgebanding operations moving efficiently.
This product is identified by the Rehau manufacturer part number 301021-572 and the web description RU301021-572, giving shops a consistent reference when matching previous projects.
This PVC edge banding, classified as edgebanding, fits wherever exposed panel edges on cabinets, shelving, or casework need a finished strip that covers the core and aligns with a specified Rehau finish.
Rehau PVC edgebanding 301021-572 from Wurth Baer Supply combines a defined 15/16X3MM FLEX size, PVC construction, and a 300FT length with a specific CP20118 LAC finish reference, giving shops a clearly identified edge banding for consistent cabinet and panel edge work.
Sold In: 1 Roll