Rehau PVC edgebanding 301021-581 is a PVC edge banding designed for covering exposed edges on wood or panel components in woodworking projects. The 15/16 inch width gives coverage across standard panel thicknesses with a small overhang, which supports trimming for a tight, finished edge. The 3mm thickness provides a substantial edge profile, which helps create a solid feel on cabinet and furniture edges. The PVC material forms a continuous edge surface, which supports a uniform appearance across multiple parts on the same job. The FLEX designation in the description identifies it as a flexible material, which helps it follow straight runs and gentle curves on casework and shelving. The CP60186 and LAC references provide an exact identity within Rehau, which helps match this banding to an existing specification or previous project. The 300FT length supports longer runs before changing coils.
The 15/16 inch width on this Rehau PVC edgebanding gives coverage across typical sheet-good thicknesses used in cabinets and fixtures, which lets installers trim back to a flush edge without exposing the core. The 3mm thickness matches common thick-edge specifications, which supports alignment with other 3mm banded components on doors, drawer fronts, or shelves. The FLEX characteristic in the description identifies a banding format that follows panel edges, which helps in routing banding around standard carcass layouts. The 300FT length described for this product provides a continuous run of material, which supports batching multiple parts and reduces handling during edgebanding operations.
This Rehau PVC edgebanding, identified as 15/16 x 3mm in the description, covers the full thickness of typical sheet stock used in cabinetry while leaving a slight excess, which allows trimming back to a tight, clean line. The 3mm thickness forms a robust front edge on doors, drawer fronts, and shelves, which supports a substantial edge look commonly specified in commercial and residential cabinetry. As edge banding, it serves to cover the exposed panel core, which helps create a finished appearance on visible cabinet and furniture edges. The PVC composition provides a single, continuous surface along the edge, which supports a uniform visual transition between the face material and the edge detail across a run of parts on the bench.
The FLEX designation in the product description shows that this Rehau PVC edgebanding is intended as a flexible strip, which helps it conform along straight runs and gentle curves found on cabinet sides, tops, and shelving. The 300FT length stated in the description supplies a long, continuous coil of material, which supports processing multiple panels in sequence with fewer changeovers. The manufacturer part number 301021-581 identifies the exact Rehau item, which helps match this banding to existing shop standards, drawings, or prior orders where the same specification was used. The description reference CP60186 LAC further narrows the identity within Rehau offerings, which supports consistent selection when the same edge profile and appearance are required across different projects handled through Wurth Baer Supply.
The 15/16 x 3mm description states the width and thickness of the Rehau PVC edgebanding, which defines how it covers panel edges and builds the finished edge profile on cabinets and furniture.
The FLEX designation indicates a flexible PVC edgebanding format, which helps the material follow straight runs and gentle curves on cabinet and shelving edges during edge banding operations.
The 300FT length described for this PVC edgebanding provides an extended coil, which supports processing multiple parts in a row and reduces stops to change rolls during production.
The Rehau 301021-581 part number gives a precise product identity, which helps align this PVC edgebanding with drawings, prior projects, or standard shop specifications that call out this item.
The 3mm thickness builds a noticeably substantial edge on panels, which supports a solid edge appearance and helps coordinate with other 3mm banded components in the same installation.
This Rehau PVC edge banding is used on exposed edges of wood or panel components in woodworking projects, which helps create finished cabinet, furniture, and fixture edges.
This Rehau PVC edgebanding, identified as 301021-581 with a 15/16 inch width and 3mm thickness, provides a defined edge profile for wood and panel components. The FLEX designation and 300FT length in the description support continuous runs on cabinet and furniture projects, which fits well with production-focused woodworking through Wurth Baer Supply.
Sold In: 1 Roll