Rehau PVC edgebanding 301021-583 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges, so cabinet and furniture projects gain a defined edge instead of an exposed core. The product is classified as Edge Banding in the Edgebanding category, which places it directly in the workflow for casework, shelving, and panel-based components where a durable edge detail is required. The SAP description 15/16X3MM FLEX CP20565 LAC 300FT identifies the size and format in one line, helping shops match this part to existing cutlists by dimension. The Rehau brand ties this edgebanding to an established edge solutions manufacturer, which supports consistency when the same color code and part number are used across repeat jobs or reorders.
The 15/16 inch width called out in the 15/16X3MM FLEX CP20565 LAC 300FT description covers the face and overhangs typical panel thicknesses, so trimmers can remove excess and leave a tight edge line in a single pass. The 3mm thickness works as a structural edge banding, so corners and door edges feel substantial when panels are handled and opened in service. The 300FT length creates extended run capacity, so a single roll can carry through multiple cabinets or a small project phase without switching materials midstream. The FLEX designation applies to the PVC construction, so feeding through standard edgebanders or manual application setups stays manageable across straight cabinet edges and panel sides.
This product is identified as Rehau PVC Edgebanding, 301021-583, placing it squarely in edge finishing tasks for panel-based construction. The Edge Banding product class and Edgebanding category position it for use on cabinet boxes, shelves, and similar components that start from sheet goods and require an edge detail. The 15/16 inch width from the 15/16X3MM description ties well to common 3/4 inch board work, so installers can process cabinet sides, tops, and bottoms without changing to a narrower tape. The 3mm thickness builds a more substantial profile at doors and drawer fronts, so the edge reads visually as a defined band, which is useful when matching existing 3mm installations on replacement parts. The 300FT roll designation supports runs across multiple panels, so small production batches in a woodworking shop can keep flow steady around an edgebander or manual station.
The manufacturer part number 301021-583 gives an exact identifier, so returning to the same edgebanding on future jobs or warranty work is straightforward when projects specify that part. The 15/16X3MM FLEX CP20565 LAC 300FT description concentrates the critical details in a repeatable string, so shop paperwork and digital cutlists can call out the same code without confusion over width or thickness. The 15/16 inch width offers trim allowance across standard furniture panels, so technicians can rely on a consistent overhang that trims cleanly rather than chasing slight undersize strips. The 3mm thickness supports a robust edge, so frequent handling on cabinets and commercial furniture edges stresses the solid band instead of the core material. The FLEX PVC format described in the SAP line is suited to routine edge banding workflows, so feeding, cutting, and trimming stay predictable across similar panel runs. The 300FT length further supports continuity, so planning material usage per room or bank of cabinets becomes a straightforward calculation from total edge length to roll footage.
Rehau 301021-583 is a PVC edgebanding in the Edge Banding product class, so it is used to cover and finish exposed panel edges on cabinets and similar projects.
This Rehau PVC edgebanding has a 15/16 inch width, described as 15/16X3MM, so it overhangs typical 3/4 inch panels for flush trimming after bonding.
The 3mm specification in 15/16X3MM indicates a 3mm thick edge banding, so the edge presents a substantial profile suitable for doors, drawer fronts, and high-contact cabinet parts.
The FLEX term in the SAP description indicates a flexible PVC format, so the edgebanding can be handled and processed through standard edge banding setups on straight panel edges.
The SAP description states 300FT, so the edgebanding is supplied as a 300 foot length, supporting multiple cabinet components or project sections from a single roll.
The manufacturer part number 301021-583 uniquely identifies this Rehau PVC edgebanding, so shops can specify and reorder the exact same edge material on future or matching projects.
Rehau PVC edgebanding 301021-583, defined by the 15/16X3MM FLEX CP20565 LAC 300FT description, brings together a 15/16 inch width, 3mm thickness, and 300FT length to match panel-based work. Selecting this specific Rehau edge banding by part number aligns width, thickness, and roll format with cabinet, furniture, and other woodworking projects that rely on PVC edgebanding in the Edge Banding product class.
Sold In: 1 Roll