Rehau PVC edgebanding is a PVC edge banding solution identified as 301021-595 that finishes exposed panel edges so cabinet, furniture, or fixture projects present a uniform, professional edge instead of raw board.
This Rehau edge banding belongs to the Edge Banding product class, so it is designed to cover and protect substrate edges, supporting jobs where panel durability and appearance at the edge matter in daily use.
The edgebanding uses PVC material, which forms a consistent edge surface along the length of a run, helping installers maintain an even look from door to door or panel to panel on a project.
The size designation 15/16X3MM defines the working cross-section, giving fabricators an edge band wide enough to fully cover typical panel thickness while the 3mm thickness provides a substantial edge profile that stands out visually and feels solid in hand.
The reference to FLX in the description indicates a flexible form that follows straight or gently contoured edges more easily, which helps during application by reducing resistance as the material is guided along cabinet parts.
The notation CP60119 EMB LAC describes a specific embossed lacquer surface and color reference, allowing shops to target consistent appearance across multiple pieces that share this same decor code.
The 300FT length figure provides an extended run of material on one item, which supports batching multiple panels or an entire small project from a single roll, simplifying edge inventory handling at the bench.
Supplied by Wurth Baer Supply under the web description WBSC - 1432 - RU301021-595, this Rehau PVC edgebanding fits into existing Wurth workflow and part numbering, so repeat ordering and project documentation stay straightforward.
The SAP description 15/16X3MM FLX CP60119 EMB LAC 300FT defines how this Rehau PVC edgebanding behaves during application, starting with the 15/16 inch width that fully spans common panel edges so trimming operations focus on fine flush cuts rather than compensating for narrow material.
The 3mm thickness gives each edge a defined profile, which is useful when a designer wants a pronounced band at the front of cabinets or fixtures, and it provides enough material for clean scraping without cutting through to the substrate.
The PVC composition runs consistently through the band, so cutters and trimmers encounter the same material density along the length, supporting smooth passes and reducing surprises at the ends of long edges.
The flexible (FLX) characteristic helps the band conform as it is fed, which can ease setup on edgebanding equipment or hand tools because the material follows the fence or guide rather than pushing back.
The CP60119 embossed lacquer surface brings a specific texture and finish level, helping the finished edge read visually in line with similarly coded surfaces elsewhere on the project.
The 300FT roll length supports continuous feeds on production edgebanders, so a run of doors or shelving can be processed from the same coil to maintain color and surface continuity.
This Rehau edge banding, identified as PVC edgebanding in the Edge Banding product class, fits projects where exposed board edges need a finished look, such as cabinet carcasses, shelving, or furniture casework that use matching decor on the front faces.
The 15/16 inch width matches typical panel thickness ranges used in many woodworking shops, so operators can position the band with confident overhang on both sides, then flush-trim it to meet project drawings without compensating for undersized material.
The 3mm thickness creates a noticeable edge line that can serve both decorative and protective roles, making it suitable for door and drawer fronts where hands regularly contact the edge and a more substantial band is preferred.
The CP60119 EMB LAC finish reference makes this banding appropriate wherever that same decor is part of the design package, supporting consistent visual flow from flat surfaces to edges in built-ins, commercial fixtures, or residential cabinetry.
The flexible (FLX) attribute allows the band to work along straight pieces and gentle curves commonly found in custom cabinetry, reception desks, or furniture details, giving fabricators a single material that can cover multiple edge types within the same decor scheme.
The 300FT roll format aligns with shop production runs where multiple components share the same finish, enabling cutting plans that use one continuous source for an entire bank of units.
The consistent 15/16X3MM sizing of this Rehau PVC edgebanding supports repeatable machine setups because fence positions, trimmer offsets, and scrape profiles can be dialed in for this cross-section and reused whenever the 301021-595 part is on the job ticket.
The PVC material gives a stable cutting response at the trimmer and scraper, so operators can expect similar chip formation and surface quality from one job to the next, which helps standardize finishing steps after edge application.
The embossed lacquer (CP60119 EMB LAC) surface brings a defined texture that stays the same across the 300FT length, enabling quality checks to focus on bond lines and trimming rather than hunting for variations in the edge finish.
The FLX characteristic allows the band to seat firmly against the edge along its run, which supports reliable contact over the full length of doors, sides, and tops, aiding in achieving a continuous bond line during edge processing.
The clear identification as Rehau PVC edgebanding with manufacturer part number 301021-595 allows shops to specify the same item in drawings, cut lists, and reorders, so replacement panels or future add-on units can use an edge that matches the original installation.
Supplied through Wurth Baer Supply under the web reference WBSC - 1432 - RU301021-595, this edge banding ties into an established sourcing channel, supporting consistent availability for ongoing lines of cabinets, fixtures, or furniture programs that rely on this decor.
Rehau 301021-595 edgebanding is described as PVC edgebanding, so it uses PVC material, giving a uniform synthetic edge that machines consistently along its length.
The edgebanding is specified as 15/16X3MM, providing a width that covers common panel edges and a 3mm thickness that creates a substantial, trim-ready profile.
CP60119 EMB LAC identifies a specific embossed lacquer decor and surface, helping projects match this edge visually with components using the same reference.
The FLX designation indicates a flexible form, allowing the band to follow straight or gently curved edges more easily during application on edgebanding equipment.
The 300FT length supports runs covering multiple cabinets or furniture pieces in the same decor, giving enough material for batch processing from one roll.
This Rehau PVC edgebanding is identified by manufacturer part number 301021-595 and web description WBSC - 1432 - RU301021-595 at Wurth Baer Supply.
The Rehau PVC edgebanding 301021-595 combines 15/16X3MM sizing, flexible PVC construction, and the CP60119 EMB LAC decor to deliver a defined edge profile that aligns with this specific finish code across cabinets, fixtures, or furniture work.
With a 300FT roll length in the Edge Banding product class, it supports efficient production runs where repeated use of the same decor is required on multiple components.
For projects calling out Rehau PVC edgebanding in this exact part number, selecting this item from Wurth Baer Supply connects design intent, shop processing, and long-term repeatability under a single, clearly documented edge solution.
Sold In: 1 Roll