Rehau PVC edgebanding 301021-601 is a PVC edge banding designed to finish exposed panel edges, so cabinet and furniture projects get a clean, consistent look along every run. The SAP description "15/16X3MM FLEX CP40003 LAC 300FT" identifies this product as a 15/16 inch wide, 3mm thick, flexible PVC banding in a 300 foot length, giving installers enough material for longer cabinet lines or multiple jobs from a single roll. The flexible construction described in the SAP detail supports working around straight edges and gentle contours, which helps maintain a tight, professional edge on common woodworking substrates. As part of the edge banding product class from Rehau, Inc., this material is built for covering raw edges on panels, helping protect those edges from routine contact while providing a finished appearance that suits shop-built or commercial installations.
The 15/16 inch width given in the SAP description allows this Rehau PVC edgebanding 301021-601 to cover the edge and overhang slightly for trimming, which streamlines workflow on case sides, shelves, and fronts. The 3mm thickness defined in the product data creates a robust edge profile that responds well to common trimming and flush routing steps used in cabinet shops. With a 300 foot continuous length, the banding can be run across long stretches of panels or through edgebanding equipment with fewer changeovers, supporting steady production. The flexible PVC nature implied by "FLEX" helps the material seat properly along the edge during application, which supports even pressure across adhesive and promotes a uniform finished line once trimmed.
As a Rehau PVC edgebanding in the edge banding product class, the 301021-601 part is suited for finishing exposed edges on cabinet components, furniture panels, and similar wood-based assemblies. The 15/16 inch width from the SAP description aligns with common panel thicknesses, so it fits typical box sides, tops, bottoms, and shelves without excessive waste. Its 3mm thickness provides a defined edge that works well on doors, drawer fronts, and high-touch areas where a stronger edge profile is preferred for daily use. The 300 foot length means shops can edge multiple cabinet runs or a full room of casework from a single roll, helping maintain color and profile consistency across a project. Because the SAP detail calls out FLEX, this PVC material supports edging layouts that move across inside and outside edges, so installers can keep a continuous finish line as panels change direction.
The combination of 15/16 inch width and 3mm thickness specified for Rehau PVC edgebanding 301021-601 supports repeatable machine setups, because standard guides and cutters can be dialed in around that fixed profile and held for recurring work. The 300 foot length allows the same settings to be used over long production runs, which reduces small alignment changes between pieces and helps panels exit the line with a uniform edge appearance. The flex characteristic called out in "15/16X3MM FLEX CP40003 LAC 300FT" helps the banding stay seated along straight edges and gentle curves during application, which supports consistent adhesion and reduces the need to address lifting along the run. Being clearly identified by the manufacturer part number 301021-601, this PVC edge banding can be reordered or matched across projects, which helps maintain the same edge profile and performance from job to job in a shop environment.
Rehau PVC edgebanding 301021-601 has a width described as 15/16 inch in the SAP description, so it is sized to cover standard panel edges with slight overhang for trimming.
This Rehau PVC edgebanding is specified as 3mm thick in the SAP description, giving a substantial edge profile suited to doors, drawer fronts, and cabinet components that see regular handling.
The SAP description states a 300 foot length, so shops can run longer cabinet or furniture jobs using the same Rehau PVC edgebanding roll for consistent edges.
In the SAP description, FLEX indicates a flexible PVC construction, so the edgebanding can follow typical panel edges and mild curves during application.
Rehau 301021-601 is identified as Rehau PVC edgebanding in the edge banding product class, so it is intended for covering exposed panel edges.
PVC edgebanding 301021-601 is produced by Rehau, Inc., so it aligns with Rehau branded edge banding lines used in cabinet and furniture work.
Rehau PVC edgebanding 301021-601 combines a 15/16 inch width, 3mm thickness, and 300 foot length described in the SAP data, giving shops a defined PVC edge solution for routine cabinet and furniture projects. The FLEX designation in "15/16X3MM FLEX CP40003 LAC 300FT" points to a flexible PVC construction that supports normal panel edge layouts in production environments. For work that calls for a Rehau PVC edge banding profile in this size range, this clearly identified manufacturer part number 301021-601 offers a consistent option for finishing exposed panel edges through Wurth Baer Supply.
Sold In: 1 Roll