Rehau PVC edgebanding 301021-640 is a PVC edge banding from Rehau, Inc. that covers and finishes exposed panel edges, so cabinet and furniture parts present a uniform, usable edge instead of open core material. The product sits in the Edgebanding category and Edge Banding product class, so it is designed to work where a separate edging material is applied to panels in cabinet and woodworking projects. The SAP description lists 15/16X3MM FLEX CP20606 LAC 300FT, which identifies a 15/16 inch wide, 3mm thick flexible PVC strip supplied in a 300 foot length to handle longer runs and repeated projects. The flexible description means the strip is intended to conform along panel edges during application, which supports smooth, continuous coverage around casework and components. The edge banding format helps create a defined transition between the panel face and edge, which matters when building parts that need a finished, ready-to-install appearance.
The 15/16X3MM FLEX CP20606 LAC 300FT SAP description specifies 15/16 inch width, which gives coverage over typical panel thickness with a small overhang for trimming, supporting clean final edges after processing. The 3mm thickness in the same description establishes a heavier edge profile than thin tape-style edging, so the banding forms a more pronounced edge that can stand up to normal cabinet handling. The 300FT detail defines the continuous length on the roll, allowing longer uninterrupted runs along cabinet sides, tall panels, or multiple components during the same setup. The FLEX notation describes a flexible form of PVC, so the material is intended to work with edgebanding application equipment or manual techniques that expect a bendable strip during installation.
The Rehau PVC Edgebanding, 301021-640, is identified as Edgebanding in the Miscellaneous|Edgebanding category and Edge Banding product class, placing it directly in cabinet and woodworking edge finishing workflows. The 15/16X3MM FLEX CP20606 LAC 300FT SAP description shows a 15/16 inch wide, 3mm thick flexible PVC strip, which works where panel edges need that width and thickness for coverage and trimming. The flexible PVC construction referenced in the description supports use along panel edges that move through edgebanding machines or manual edge application setups. The 300FT length in the description means the roll is suited to production or repeated project work where multiple cabinet boxes, shelves, or panels share the same edge treatment.
The brand listing as Rehau, Inc. and the manufacturer part number 301021-640 help align this PVC edge banding to shop documentation, internal part numbers, or previous installations that specified this exact Rehau code. The web description WBSC - 1432 - RU301021-640 ties the product into Wurth Baer Supply identification, which supports ordering within existing supplier systems when repeating a job or matching existing stock.
The 15/16 inch width called out in the 15/16X3MM FLEX CP20606 LAC 300FT SAP description provides enough coverage for standard panel edges, so installers have a consistent margin to trim back for flush results. The 3mm thickness listed in the same description sets a robust edge layer, giving a consistent feel along doors, drawer fronts, or cabinet ends that share this edge banding. The continuous 300FT length stated in the description allows long, unbroken passes across multiple components, which supports consistent appearance from piece to piece when using the same roll.
The classification as Edge Banding and the brand identification as Rehau, Inc. connect this product to Rehau PVC edgebanding 301021-640 specifications, so replacement or expansion work can follow the same material standard. The flexible nature highlighted by the FLEX wording indicates the PVC strip is intended to feed and track through typical edgebanding workflows, helping maintain alignment along straight or gently varying edges for repeatable application results.
Rehau PVC edgebanding 301021-640 uses a 15/16 inch width from the SAP description, giving coverage over common panel thicknesses with extra material for trimming to a flush finished edge.
The SAP description lists 3mm thickness, so this PVC edge banding forms a substantial edge layer that creates a pronounced, uniform profile along doors, drawer fronts, or cabinet ends.
Rehau PVC edgebanding 301021-640 is described as 300FT in the SAP text, providing 300 feet of continuous material for edging multiple panels or larger cabinet runs.
The product class Edge Banding and category Miscellaneous|Edgebanding show it is intended specifically for covering and finishing exposed panel edges in woodworking projects.
The word FLEX in the 15/16X3MM FLEX CP20606 LAC 300FT description indicates a flexible PVC strip, designed to follow panel edges during standard edgebanding application.
The Brand Rehau, Inc. and manufacturer part number 301021-640 let shops match this PVC edgebanding to job specs and prior orders when repeating or extending installations.
Rehau PVC edgebanding 301021-640 combines a 15/16 inch width, 3mm thickness, flexible PVC format, and 300FT length as stated in the SAP description, giving shops a defined edge treatment for panel work. The Edge Banding product class, Miscellaneous|Edgebanding category, and Rehau, Inc. branding align this roll with professional cabinet and woodworking applications. For projects built around this width, thickness, and format, this PVC edge banding supports consistent edges across new builds or repeat runs.
Sold In: 1 Roll