Rehau PVC edgebanding 301021-643 is a Rehau, Inc. edge banding product designed to finish exposed panel edges on cabinetry, casework, and similar projects. The SAP description "15/16X3MM FLEX CP10031 LAC 300FT" establishes that this is a flexible PVC edgebanding with a nominal width of 15/16 inch and a thickness of 3mm, which covers standard panel edges while providing a substantial edge profile. The 300FT length described in the product data supports longer runs or multiple units on a single roll, which reduces changeovers during production or installation. The product class "Edge Banding" and category placement under edgebanding identify it as a dedicated solution for covering raw board edges, helping create a finished appearance along straight or gently curved edges where the flexible construction is useful.
The SAP description "15/16X3MM FLEX CP10031 LAC 300FT" confirms that this Rehau PVC edge banding has a nominal 15/16 inch width, which suits covering common panel thicknesses while leaving manageable excess for trimming equipment or hand tools during installation. The 3mm thickness provides a substantial material layer at the edge, which interacts well with standard edge banding machinery designed for this thickness range in woodworking shops. The flexibility referenced in the description supports feeding through typical edge banders or applying to panels where slight variations in straightness are present, helping maintain adhesion and alignment as the banding is applied along the panel run.
The product name "Rehau PVC Edgebanding, 301021-643" and product class "Edge Banding" identify this as a PVC strip used to finish raw panel edges in cabinetry, furniture, and other woodworking projects where a clean edge is needed. The nominal 15/16 inch width described in the SAP data suits many common panel thicknesses used in cabinets and casework, allowing the material to cover the full edge height with slight overhang for trimming. Because the description specifies FLEX, the edgebanding is suited to straight edges and mild curves, so it can be applied around doors, drawer fronts, and shelving where edges may not be perfectly straight yet still fall within typical woodworking tolerances. The 300FT length supports shop environments producing repeated units, such as runs of cabinet components, by letting installers or operators handle multiple pieces from a single continuous strip.
The 3mm thickness specified in the SAP description means this PVC edgebanding creates a noticeably thicker edge than ultra-thin tape, which can help the edge withstand normal contact along doors or panels while presenting a defined profile. That same 3mm dimension aligns with many edge banders and trimming setups designed around this thickness, which supports consistent flush trimming and corner finishing. The nominal 15/16 inch width gives a margin beyond standard panel thicknesses, so after bonding, any slight misalignment can be trimmed away to leave a straight finished edge. The flexible construction referenced in the description allows the strip to lie flat against typical panel materials as it is applied, which supports better bonding along the length and helps reduce rework on edges that have minor variation. The 300FT length provides enough material to edge multiple cabinets or casework components in sequence, helping maintain color and profile consistency across a project because the same roll serves many parts.
Rehau PVC edgebanding 301021-643 is a PVC edge banding product from Rehau, Inc. used to finish exposed panel edges, giving cabinet and furniture components a more finished edge treatment.
This Rehau PVC edgebanding is described as 15/16X3MM, meaning a nominal 15/16 inch width and 3mm thickness, which suits covering common panel edges with a substantial profile for trimming.
The SAP description lists 300FT, indicating a 300-foot length that supports edging multiple panels or a full project run from a single roll in a shop environment.
The word FLEX in the description indicates a flexible PVC edgebanding construction that conforms to straight edges and gentle curves, supporting smoother application along typical woodworking panels.
This 3mm PVC edgebanding, classified as edge banding, suits finishing cabinet, furniture, and casework edges where a thicker edge profile and PVC construction are desired.
The 3mm thickness provides a solid-feeling edge profile, which works well with edging equipment set up for 3mm material and helps create a pronounced, finished edge on panels.
The Rehau PVC edgebanding 301021-643 combines a nominal 15/16 inch width, 3mm thickness, flexible construction, and 300FT length to support professional edge finishing on cabinets, casework, and furniture components. The product data establishes this as a PVC edge banding solution from Rehau, Inc. under the manufacturer part number 301021-643, so it aligns with projects calling for this specific material and dimension set. For workflows that demand consistent edges across multiple panels, this format provides a practical match to edging equipment and common panel sizes while maintaining a defined, finished edge profile along exposed board edges.
Sold In: 1 Roll