Rehau PVC edgebanding 301021-680 provides a PVC edge banding solution that finishes raw panel edges so cabinet and furniture parts have a defined, usable edge instead of exposed core material. The 15/16 x 3mm size covers typical 3/4 inch panel edges with a slight overhang that allows trimming back to a crisp, straight line. The CP41005 designation identifies the specific design and finish family, so matching existing Rehau CP41005 work across a project stays consistent from part to part. The 300FT length stated in the description supplies a long, continuous run that lets installers band multiple cabinets or casework components without frequent roll changes, which supports steady workflow on repetitive jobs.
The 15/16 x 3mm sizing in the SAP description sets up straightforward installation on panels sized around 3/4 inch, since the extra width allows a small trim margin at both edges. The PVC designation in the product name indicates a thermoplastic edgeband that responds predictably to standard hot-melt edgebanding equipment, so shop settings can be dialed around familiar PVC behavior. The 300FT length referenced in the SAP description helps feed longer runs through automatic edgebanders or support manual application over many parts without constant material changes, maintaining consistent heat and feed conditions from the first piece to the last.
The product name Rehau PVC edgebanding, 301021-680 identifies this as a Rehau, Inc. edge banding solution aimed at covering exposed edges on manufactured panels. The category listing under Edgebanding confirms its role as an edge-finishing product rather than a structural panel. The 15/16 x 3mm size in the SAP description gives enough coverage to handle standard cabinet carcass sides, shelves, and door or drawer fronts built from 3/4 inch sheet goods, while still trimming quickly to final size. Because it is PVC, as stated in the product name, the banding works with typical cabinet-grade PVC edgebanding processes that many shops already run, so it integrates into existing casework, fixture, or furniture production that specifies Rehau CP41005 designs.
The 3mm thickness from the SAP description supports consistent trimming because a thicker PVC edge banding gives trimmers a stable surface to follow, which helps reduce chatter along the edge. The 15/16 inch width, also stated in the SAP description, provides intentional overhang beyond a 3/4 inch core, so both faces can be trimmed back to a clean line without exposing core material. The Rehau brand and manufacturer part number 301021-680 link the edgeband to a defined production spec, which helps shops repeat the same look and feel across reorders or multi-phase projects. The CP41005 reference in the SAP description further defines the design family, allowing consistent edge selection whenever that CP41005 designation appears on project documentation.
Rehau PVC edgebanding 301021-680 is described as 15/16 x 3mm, providing slight overhang on 3/4 inch panels so both edges can be trimmed flush for clean cabinet or furniture edges.
The product name specifies PVC, so this edge banding uses PVC material that works with standard PVC edgebanding equipment and trimming tools commonly used in cabinet shops.
The 3mm thickness listed in the SAP description gives a substantial edge that trims predictably and offers a solid-feeling profile on cabinet and furniture parts.
The 15/16 inch width exceeds a 3/4 inch panel slightly, leaving margin on both sides so trimmers can cut back to a precise, chip-free finished edge.
The CP41005 LAC text in the SAP description identifies the specific Rehau design family, helping match this PVC edgebanding to project specifications that call for CP41005.
The SAP description notes 300FT, providing a long continuous run that supports edging multiple components or full cabinet jobs with fewer material changeovers.
Rehau PVC edgebanding 301021-680 combines a 15/16 x 3mm format with the CP41005 designation and a 300FT length, aligning with cabinet and furniture work that needs consistent PVC edges across many parts. Ordering by the manufacturer part number 301021-680 maintains continuity on repeat jobs that reference the same Rehau CP41005 specification, so panel edges across phases stay matched in size and design.
Sold In: 1 Roll