Rehau PVC edgebanding is PVC edge banding from Rehau, Inc. that finishes exposed panel edges so cabinet and furniture parts have a consistent, usable edge ready for installation in a project run. The 15/16 inch width cited in the description gives coverage over standard panel thicknesses with trim margin, so installers can flush-trim back to the panel without exposing core material. The 3mm thickness indicated in the SAP description creates a substantial edge profile, which supports higher-impact furniture and cabinet applications where a thin tape would feel light. The flexible description in the SAP text signals that this edgebanding bends around normal cabinet and furniture layouts, helping parts align without fighting the material during runs. The CP41034 LAC reference identifies a specific decor and finish, allowing shops to match this exact look across repeat jobs. The 300 ft length stated in the description gives enough material for production or multiple small projects from a single roll.
The 15/16 inch width given in the SAP description supports both machine and hand application because it overhangs common panel sizes enough for trimming while still feeding predictably through edge-banding equipment. The 3mm thickness stated in the description works with edgebanding setups designed around thicker edges, which gives a more substantial feel at cabinet doors, shelves, and panels. The PVC material referenced in the product name describes a plastic formulation that responds well to standard edgeband trimming and scraping, so installers can cut back the overhang to a clean line. The 300 ft roll length mentioned in the description supports extended production, allowing long runs of panels to be processed from a single roll without changing material mid-job.
The product name identifying Rehau PVC edgebanding places this item in typical woodworking and cabinet workflows where panels need finished edges. The 15/16 inch width from the SAP description covers standard board thicknesses used in cabinets and casework, so one size can serve multiple panel thicknesses in a shop. The 3mm thickness noted in the description suits furniture, cabinet doors, and shelves where a pronounced edge profile matches the design intent. The CP41034 LAC reference in the SAP text marks a specific decor option, which helps designers and production teams keep color and sheen consistent across panels, doors, and trim pieces. The 300 ft length indicated in the description supports series production, so a run of parts for kitchens, offices, or commercial interiors can be processed without a changeover.
The Rehau, Inc. brand named in the product data ties this PVC edge banding to a single manufacturer, which simplifies re-ordering the same 301021-689 part when future projects call for the identical edge detail. The manufacturer part number 301021-689 uniquely identifies this exact combination of width, thickness, decor code, and length, so cut lists and purchase records can call out one precise item rather than generic descriptions. The flexible note in the SAP description signals that the material can negotiate normal cabinet layouts, which helps keep alignment under control on straight runs and gentle transitions. The 15/16 inch width and 3mm thickness together define trim settings and tooling expectations, which lets shops dial in edgebander or hand-tool passes for repeatable edges job after job. The PVC material indicated in the product name gives predictable trimming and scraping behavior, which supports clean edges and reduces touch-up passes in production environments.
Rehau 301021-689 is PVC edgebanding from Rehau, Inc., so it is used to finish exposed panel edges on cabinets and furniture parts for a consistent, usable edge.
The SAP description lists this Rehau PVC edgebanding as 15/16 inch wide and 3mm thick, which provides trim overhang and a substantial edge profile for cabinet and furniture components.
The SAP description specifies a 300 ft length, which supports longer production runs or multiple smaller projects using the same edge detail from one roll.
The CP41034 LAC reference in the SAP description identifies a specific decor and finish, which lets design and production teams repeat the same appearance across projects.
The product name states PVC edgebanding, so the material is PVC, which trims and scrapes with standard edgebanding tools in cabinet and furniture work.
The 3mm thickness noted in the description produces a thicker edge profile, which suits cabinet doors, shelves, and furniture components that benefit from a more substantial edge look.
The Rehau PVC edgebanding identified as manufacturer part 301021-689 gives a 15/16 inch by 3mm flexible edge solution with a CP41034 LAC decor in a 300 ft roll, so projects can maintain the same edge profile and appearance across multiple parts. For cabinet, furniture, or interior panel work that calls for this specific size, thickness, and finish combination, this Rehau, Inc. edgeband aligns panel edges with the intended design and supports repeat ordering by the same part number.
Sold In: 1 Roll