Rehau PVC edgebanding 301574-448 provides a PVC edge banding solution for finishing exposed panel edges so workpieces present a consistent, protected edge. The product is classified under the Edge Banding product class, so it is intended to cover and finish raw substrate edges in cabinet, furniture, or casework projects. The 15/16 inch width in the SAP description "15/16X.018 C400764 EMB LAC 600FT" is sized to span standard 3/4 inch panels with margin, helping installers trim back to a tight, flush edge. The .018 inch thickness in the same description reflects a thin PVC edge that shapes quickly, which supports efficient routing and scraping without heavy material removal. The 600FT reference in the description indicates a continuous length suited to production runs where consistent color and texture across many parts matters.
The 15/16 inch width identified in the SAP description gives slight overhang on typical 3/4 inch panels, which supports standard edgebanding practice of applying, then trimming back to a flush line on both faces. The .018 inch thickness from the same description represents a thin PVC profile that responds well to typical edgebanding trimmers and routers, helping reduce cutting resistance and fine-tuning time at the edge. The 600FT length reference in the description suits runs where many parts share the same edge detail, so operators can move from panel to panel without frequent material changeover. The product class "Edge Banding" indicates it is intended to be applied along linear edges, fitting typical edgebander or hand-application workflows.
The Category "Miscellaneous|Edgebanding" and Product Class "Edge Banding" show that Rehau PVC Edgebanding, 301574-448 is suited to edging tasks on wood-based components such as cabinets, casework, and similar assemblies where exposed panel edges require a finished surface. The 15/16 inch dimension in the SAP description "15/16X.018 C400764 EMB LAC 600FT" gives coverage that works with common panel thicknesses used in woodworking, leaving enough material for flush trimming without exposing the core. Because the SAP description specifies a continuous 600FT length, this banding supports workshop and jobsite situations where many shelves, doors, or partitions share the same edging requirement, enabling consistent appearance from the first part to the last.
The .018 inch thickness noted in the SAP description provides a relatively thin PVC edge that shapes predictably under trimming tools, which helps installers produce smooth transitions from edgebanding to face without a noticeable ridge. The 15/16 inch width paired with this thickness lets users run standard trimming passes rather than adjusting for unusual dimensions, supporting repeatable setups on edge banders or hand tools. The Manufacturer Part # "301574-448" ties these physical characteristics to a single part reference, so once a shop dials in equipment settings for this material, they can repeat those settings whenever this part number is used. The Brand "Rehau, Inc." connects the edgebanding to a manufacturer focused on edge banding products, which supports consistent behavior when shops specify Rehau PVC edgebanding across multiple jobs.
Rehau PVC Edgebanding, 301574-448 uses a 15/16 inch width from the SAP description, giving overhang on typical 3/4 inch panels so edges can be trimmed back to a clean, flush finish.
Rehau PVC edgebanding 301574-448 has a .018 inch thickness per the SAP description, creating a thin PVC edge that responds well to standard trimming and scraping for a smooth transition.
Rehau PVC edgebanding 301574-448 lists 600FT in the SAP description, supporting longer production runs where many cabinet or furniture parts use the same edge detail.
The Manufacturer Part # 301574-448 uniquely identifies this Rehau PVC edgebanding, helping shops reorder the same edge material and align with drawings or material lists.
The C400764 EMB LAC portion of the SAP description designates a specific style of this 15/16 x .018 PVC edgebanding, tying physical and visual characteristics to a single code.
This product is listed in the Miscellaneous|Edgebanding category and Edge Banding class, indicating it is intended for general edging of wood-based panels in woodworking projects.
Rehau PVC edgebanding 301574-448 offers a 15/16 inch width and .018 inch thickness, as stated in the SAP description "15/16X.018 C400764 EMB LAC 600FT", giving installers a defined size for edging typical panel stock. The Manufacturer Part # 301574-448 and Brand "Rehau, Inc." connect the roll to a specific, repeatable material choice when consistent edge appearance matters across projects. The 600FT length reference in the description supports shops that run many components with the same edge detail. Select this edge banding when those dimensions and this Rehau specification align with your cabinet, furniture, or casework edge requirements.
Sold In: 1 Roll