Rehau PVC Edgebanding 301574-453 is a PVC edge banding from Rehau, Inc. that covers and finishes exposed panel edges so cabinets and casework present a consistent, professional appearance. The product sits in the Edge Banding product class and is categorized under Miscellaneous|Edgebanding, so it is geared to panel finishing tasks rather than structural work. The SAP description 15/16X.018 C600678 EMB LAC 600FT defines the strip as 15/16 inch wide and 0.018 inch thick, giving a slim profile that matches common panel thickness transitions without adding bulk. The 600FT notation indicates a continuous supply length suited to repetitive runs on production jobs or larger one-off installations where changing materials mid-run would break visual consistency.
The 15/16X.018 dimension in the SAP description 15/16X.018 C600678 EMB LAC 600FT defines how this Rehau PVC Edgebanding meets the workpiece during installation. The 15/16 inch width gives coverage on typical panel edges with margin for final trimming, which supports clean alignment during routing or knife trimming. The 0.018 inch thickness means the banding adds only a thin layer at the edge, keeping doors and panels close to their nominal size once applied. The 600FT length described in the product data serves shops that run multiple parts with the same finish, supporting an uninterrupted workflow across cabinet components.
This product is identified as Rehau PVC Edgebanding, 301574-453, within the Edge Banding product class, so it is intended for edge treatment on panel-based components used in woodworking. The Miscellaneous|Edgebanding category places it among materials that finish exposed substrate edges on cabinets, furniture, and similar projects. The 15/16 inch width from the 15/16X.018 C600678 EMB LAC 600FT description fits typical panel edge heights used in casework, letting builders apply the banding along vertical or horizontal edges without changing materials between sections. The 0.018 inch thickness supports applications where a slim edging is desired, helping maintain clearances between adjacent doors or drawer fronts once the banding is applied and trimmed flush.
The clearly defined manufacturer part number 301574-453 allows shops to match this exact Rehau PVC Edgebanding on repeat orders, which is important when a project extends over multiple phases and requires the same edging profile. The PVC material designation means the edging is formulated as a PVC edge banding, giving a uniform surface that works predictably with edgebanders and trimming tools during installation. The 600FT length referenced in the SAP description supports consistency on larger jobs by allowing a run of many panels from the same continuous material. The 15/16X.018 size drives how cuts and trims behave at the edge, helping installers produce a clean, narrow transition that aligns with nearby components.
Rehau 301574-453 is a Rehau PVC Edgebanding in the Edge Banding product class, so it serves as a finishing strip for exposed panel edges in woodworking projects.
The SAP description 15/16X.018 C600678 EMB LAC 600FT shows a width of 15/16 inch, giving coverage over standard panel edges with material available for trimming.
The 0.018 inch thickness in 15/16X.018 C600678 EMB LAC 600FT keeps the edge build-up minimal, so doors and panels stay close to their intended size after edging.
The 600FT length described in the SAP data supports long or repeated runs, allowing many cabinet parts to be edged with the same continuous Rehau PVC Edgebanding.
This edgebanding is produced by Rehau, Inc., giving installers a defined manufacturer source when matching materials or specifying edge banding in project documents.
The product is listed in the Miscellaneous|Edgebanding category and Edge Banding product class, indicating its role as an edge-finishing material for panel work.
Rehau PVC Edgebanding 301574-453 combines a defined 15/16X.018 size with a 600FT length, giving shops a repeatable edge solution for cabinet and panel projects. The product sits clearly in the Edge Banding class and Miscellaneous|Edgebanding category, so its purpose is focused on finishing exposed edges. With the Rehau, Inc. manufacturer identification and specific part number 301574-453, it aligns well with production workflows that depend on consistent materials across multiple jobs. Choose this PVC edge banding when a slim, uniform edge treatment is needed across a substantial run of components.
Sold In: 1 Roll