Rehau PVC edgebanding 301574-474 is a PVC edge banding from Rehau, Inc. that covers raw panel edges so cabinet, furniture, or fixture projects present a finished look and protect substrate edges in everyday use. The 15/16 inch width, identified as 15/16X.018 in the SAP description, matches common panel thickness layouts while allowing slight overhang for trimming so edges sit flush and professional after processing. The .018 inch thickness, expressed as .018 in the description, keeps the banding slim so corners stay crisp and do not feel bulky along door or shelf edges. The C600448 reference in the SAP description identifies this specific configuration so repeat orders match the same edge detail across multiple jobs. The 600FT length in the description designates a long roll format that supports longer production runs or multiple small projects without frequent material changeovers during edgebanding work.
The 15/16X.018 sizing called out in the SAP description defines both width and thickness so installers can match the Rehau PVC edgebanding 301574-474 to standard panel layouts. The near-1-inch width spans typical carcass or door edges while allowing extra material for flush trimming passes. The .018 inch thickness yields a lean edge that works with common trimming tools, so the banding seats closely to the core material and keeps edge transitions subtle. The long 600FT roll length stated in the description supports continuous feeding through edgebanders, helping maintain a steady setup curve over extended production runs.
The Rehau PVC edgebanding, listed under the Edge Banding product class, is intended for edging panel-based components where a PVC edge is preferred. Its classification in the Miscellaneous|Edgebanding category aligns it with cabinet, furniture, and casework projects that rely on man-made panels and require covered edges around doors, shelves, or carcass parts. The 15/16 inch width identified in the SAP description works well around typical 3/4 inch panels because it allows a practical margin to trim back, giving installers control over final alignment. The .018 inch thickness helps keep visual bulk down, so edges on drawer fronts or side panels match a refined appearance rather than looking oversized. The long 600FT roll detail supports shops that run multiple pieces in a sequence, because one roll can cover many linear feet of edging before another roll change is needed.
The manufacturer part number 301574-474 and the C600448 reference in the SAP description tie this Rehau PVC edgebanding to a specific configuration, which helps keep edge appearance consistent from one job to the next when the same part number is used. The PVC material identified in the product name aligns with standard PVC-capable edgebanders, so set points for temperature, feed, and trimming that already work for PVC can be used again to produce repeatable seams. The 15/16X.018 dimension in the description allows installers to set trimming tools to a familiar profile, which reduces adjustment time when moving between projects using similar panels. The 600FT designation indicates a roll size that favors uninterrupted runs, helping maintain a single setup across many cabinet parts and supporting uniform edges across an entire job.
Rehau PVC edgebanding 301574-474 is a PVC edge banding from Rehau, Inc., used to cover and finish exposed panel edges in cabinet, furniture, or similar woodworking projects.
The Rehau PVC edgebanding 301574-474 has a width listed as 15/16 in the 15/16X.018 description, giving coverage across typical panel edges with margin for trimming.
The .018 dimension in 15/16X.018 indicates the edgebanding thickness, which provides a thin edge profile so finished parts keep a slim, clean edge appearance.
The 600FT detail in the SAP description indicates the roll length, supporting extended edgebanding runs or multiple projects from a single roll.
The manufacturer part number 301574-474 identifies this exact Rehau PVC edgebanding, helping shops reorder the same configuration to maintain consistent edge appearance over time.
The C600448 EMB LAC reference in the SAP description designates this specific configuration of Rehau PVC edgebanding, supporting accurate identification in planning and purchasing.
Rehau PVC edgebanding 301574-474 combines a 15/16X.018 profile with a 600FT roll length so edging work on cabinets, furniture, or casework uses consistent dimensions from start to finish. The PVC material type described in the product name aligns with PVC-capable edgebanders for straightforward setup. The defined Rehau, Inc. manufacturer part number 301574-474 and the C600448 designation in the SAP description allow straightforward repeat ordering when projects call for the same edge look. Selecting this specific Rehau PVC edgebanding keeps edge details uniform across panels and across jobs.
Sold In: 1 Roll