Rehau PVC edgebanding 301574-500 is a PVC edge banding from Rehau, Inc. that covers and finishes exposed panel edges, giving casework and fixtures a consistent, worked look. The 15/16 inch width spans standard panel thicknesses with room to trim, helping installers achieve a full edge without leaving substrate exposed. The .018 inch thickness keeps this edge banding slim, which supports tight reveals and precise corners on cabinets, shelves, and partitions. The C100033 EMB LAC designation identifies the specific decor and embossing, so shops can repeat a finish across multiple jobs. The 600 ft length in a single run supports longer production work without frequent changeovers, which helps maintain rhythm at the edgebander or during manual application. The PVC construction gives the edge a uniform profile, which matters when trimming and flushing to adjacent surfaces.
This Rehau PVC edge banding uses a 15/16 inch width, which gives a comfortable margin when centering the strip on common panel edges before trimming. The .018 inch thickness works well where a slim edge is preferred, helping keep the transition from panel face to edge subtle and controlled. Over a 600 ft length, the consistent PVC profile supports repeatable trimming and scraping, which benefits both manual and automated setups. The defined C100033 EMB LAC finish keeps the visible edge appearance uniform along that length, supporting a steady look across doors, drawer fronts, and carcass parts.
This Rehau PVC edgebanding fits edge-finishing tasks on cabinets, casework, and other panel-based builds that call for a 15/16 inch edge treatment. The width works with panel materials where a bit of overhang is preferred for flush-trimming, helping produce crisp edges on verticals, horizontals, and shelving. In shops processing repeated parts, the 600 ft length lets operators run job segments using the same C100033 EMB LAC appearance without swapping to another coil. Because the strip holds a .018 inch thickness along the run, it suits areas where a slim, neat edge is part of the visual requirement, such as fronts and visible carcass edges.
The Rehau, Inc. branding and 301574-500 manufacturer part number work together as a reliable identifier when specifying or reordering the same edgebanding for follow-up work. That consistent identification matters when a project standard calls out PVC edge banding by exact part number or by the SAP description 15/16X.018 C100033 EMB LAC 600 FT. Using that description ties the width, thickness, finish code, and run length directly to the product, which supports uniform results as the same banding is applied across multiple rooms, phases, or matching projects handled by the same shop.
The 15/16 inch size provides enough overhang on each side of common panel edges to allow trimming tools to cut cleanly, which helps limit chipping at corners and produces a smooth edge line. The .018 inch thickness offers a balance between visibility and subtlety, which supports a consistent reveal while keeping the edge from feeling bulky at doors or shelf fronts. Over a 600 ft length, that same thickness and width repeat, which is useful when running batches of parts through an edgebander where setup is tuned to this profile.
The specific C100033 EMB LAC designation linked to this PVC edge banding keeps the visual and surface pattern consistent anywhere it is used on a project. When the same 301574-500 part is pulled for different phases of work, that designation ties the edge detail back to the earlier installation. This alignment helps shops match existing casework or extend a job later without visible differences at the edge, giving installers confidence that the banding appearance and dimensions will behave the same from piece to piece.
The 15/16 inch width on Rehau PVC edgebanding 301574-500 spans typical panel thicknesses with extra margin, supporting centered placement and clean trimming for finished cabinet and casework edges.
The .018 inch thickness on this PVC edge banding produces a slim edge profile, which keeps transitions subtle and supports tight, neat joints on doors, shelves, and carcass parts.
The C100033 EMB LAC designation specifies the finish and embossing on this Rehau PVC edgebanding, which helps shops repeat the same appearance across current and future projects.
The 600 ft length of Rehau PVC edgebanding 301574-500 supports longer production runs, reducing coil changes and helping maintain consistent output on repeated cabinet components.
The 301574-500 part number uniquely identifies this Rehau PVC edgebanding, which simplifies specifying, storing, and reordering the exact same 15/16 x .018 profile and finish.
The SAP description 15/16X.018 C100033 EMB LAC 600 FT links size, finish code, and length, which helps document and repeat this exact PVC edge banding setup on project specifications.
Rehau PVC edgebanding 301574-500 combines a 15/16 inch width, .018 inch thickness, and C100033 EMB LAC finish in a 600 ft length for repeatable edge work. When a project calls for this exact specification, choosing this PVC edge banding aligns on size, appearance, and run length so cabinets, casework, and panel builds share the same defined edge detail from part to part.
Sold In: 1 Roll