Rehau PVC Edgebanding 301574-520 For Clean Edges

Rehau PVC edgebanding 301574-520 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so they match the surface and look complete. The edge banding is classified as edge banding in the edgebanding category, so it is intended for covering raw edges on panels in woodworking and cabinet projects. The SAP description shows the size as 15/16 inch wide and .018 inch thick, giving a slim edge treatment that sits close to the panel face for a low-profile finish. The SAP description also specifies a 600 foot length, so a single roll can run through long cabinet jobs or multiple smaller projects without constant changeover. This Rehau edge banding provides a consistent branded material choice on jobs that specify Rehau, which helps keep color, texture, and edge appearance uniform across all panels.

Key Rehau PVC Edgebanding Details For Projects

• The Rehau PVC edgebanding is identified as manufacturer part 301574-520, so installers can match it directly to drawings or cut lists that call out this exact number and maintain product consistency across orders.
• The product width of 15/16 inch gives coverage that works with common panel thicknesses while leaving slight tolerance for trimming, which supports a clean flush edge after machining or edge trimming passes.
• The .018 inch thickness described in the SAP detail provides a thin edge profile, so the transition from face to edge stays subtle and helps panels stack, align, and fit within tight cabinet reveals and casework.
• The 600 foot length noted in the SAP description allows continuous feeding through edgebanding equipment on longer runs, which reduces roll changes and helps maintain consistent machine settings and results throughout the job.
• The material listed as PVC in the product name identifies it as a synthetic edge solution, so it works as a dedicated edge banding layer between the panel core and everyday use in typical woodworking and cabinet environments.

Edgebanding Size And Details For Installation

The SAP description 15/16X.018 C600252 EMB LAC 600 FT provides the key installation dimensions for this Rehau PVC edgebanding. The 15/16 inch width gives installers enough coverage over standard panel edges with room for a light trim pass, so the finished edge can be brought flush without exposing the substrate. The .018 inch thickness means the banding presents a thin edge that works well with typical edgebanding machines and trimmers, helping rollers, cutters, and flush-trim tools stay within normal adjustment ranges. The 600 foot length supports extended runs on automated edge banders or handheld application setups, so an installer can process multiple cabinets or casework units from a single roll while keeping feed and heat settings consistent.

Using Rehau 301574-520 Edgebanding In Workflows

Where This PVC Edge Banding Performs Best

This Rehau, Inc. product is categorized by Wurth Baer Supply as edgebanding in the miscellaneous edgebanding category, which positions it for finishing the raw edges of panels in woodworking and cabinetry. The PVC construction identified in the product name makes it a purpose-built edging layer over panel cores, so exposed sides on shelves, cabinet carcasses, and similar assemblies can match the face material more closely. The manufacturer part number 301574-520 provides a clear reference when a shop standardizes on a specific edge color or style, allowing estimators, buyers, and machine operators to refer to the same code in job documentation.

The width of 15/16 inch gives coverage that works with common panel dimensions, so edges on verticals, horizontals, and doors can be banded with one size and then trimmed for a consistent reveal. Because the thickness is .018 inch, the edge banding maintains a slim profile that does not significantly change overall part dimensions, which helps doors, drawer fronts, and panels fit within planned clearances. The 600 foot length supports batch production, so a shop can run this edge banding through automated equipment on a full job and keep setup stable from the first panel to the last.

Why These Dimensions Support Repeatable Results

The combination of 15/16 inch width and .018 inch thickness, as stated in the SAP description, gives installers predictable measurements that translate directly into machine settings and trimming expectations. The width offers slight overhang beyond panel thickness, so edge trimmers can remove just enough material to create a flush, straight edge without cutting back into the panel face. The thin .018 inch profile sits close to the surface, which supports tight reveals between doors and casework parts because the added edge layer only minimally affects finished part size.

The defined 600 foot length supports repeatability across runs because one roll can serve many parts under the same feed, glue, and trimming parameters, helping operators keep their setup stable over more linear feet of production. Having the Rehau brand and the exact manufacturer part number 301574-520 documented for this PVC edge banding also supports repeat orders for future runs, so follow-up jobs can use the same edge material and preserve the visual and dimensional behavior that the original setup was built around.

Common Questions About Rehau 301574-520 Edgebanding

Select Rehau PVC Edgebanding 301574-520 For Your Jobs

Rehau PVC edgebanding 301574-520 combines a 15/16 inch width, .018 inch thickness, and 600 foot length in a single Rehau, Inc. edge banding product. Those dimensions give shops a predictable, slim edge profile that suits common panel thicknesses and cabinet constructions. The defined manufacturer part number 301574-520 and its classification as edge banding through Wurth Baer Supply let project teams specify and reorder the same material across bids, production runs, and service work. For projects that call for PVC edge treatment with documented dimensions and brand, this Rehau PVC edge banding offers a clearly identified option.