Rehau PVC edgebanding 301574-525 is PVC edge banding in the Rehau, Inc. line, giving panel edges a coordinated finish that stands up to shop and jobsite handling. The edge banding belongs to the Edge Banding product class, so it is suited to covering exposed substrate edges on casework, shelving, and similar panel constructions. The SAP description lists a width of 15/16 inch and a thickness of .018 inch, which lets this banding cover typical 3/4 inch panel edges with a small overhang for trimming during fabrication. The same description identifies material C200138 and finish noted as EMB LAC, so the banding provides an embossed, lacquered PVC surface that aligns with decorative panel faces using that specification. The 600 FT designation in the SAP description indicates a 600-foot length, supporting longer production runs and repeated cabinet or furniture projects from a single roll.
The SAP description specifies 15/16 inch by .018 inch dimensions, giving fabricators predictable coverage and trimming results on common panel thicknesses. The 15/16 inch width allows a slight overhang beyond both faces of a 3/4 inch panel, so after bonding, the excess can be trimmed back flush to the faces with standard edgebanding equipment. The .018 inch thickness keeps the transition from face to edge discreet, which supports tight-fitting fronts and aligns with modern casework reveals. Because these dimensions are fixed by the manufacturer part number 301574-525, shops can standardize machine settings around this banding for repeatable runs.
This product is described under the Category Miscellaneous|Edgebanding and Product Class Edge Banding, indicating its role as a finishing edge material for panel-based construction. The 15/16 inch width stated in the SAP description matches applications around 3/4 inch engineered wood or composite panels used in cabinets, closets, and furniture components. Because the SAP description notes material C200138 with an EMB LAC finish, the banding is intended to coordinate with decorative surfaces using the same specification, so exposed edges on doors, drawer fronts, and case ends can visually align with their faces. The 600 FT length referenced in the SAP description supports these repeated uses across multiple parts and projects in a woodworking or fabrication environment.
The manufacturer part number 301574-525 uniquely identifies this combination of width, thickness, material code C200138, and EMB LAC finish, so shops can reorder the same banding for consistent production runs. The 15/16 inch by .018 inch dimensions from the SAP description let operators dial in trimmers and edgebanders to a known PVC edge profile, helping reduce trial runs when setting up machines. The EMB LAC notation signals an embossed, lacquered PVC surface, so when paired with compatible panels, the finished edge can carry through the same texture and sheen along the entire run of parts. The 600 FT length noted in the SAP description provides extended footage from a single roll, which supports continuous processing of cabinet components without frequent material changes during workflow.
Rehau PVC edgebanding 301574-525 is listed in the SAP description as 15/16 inch wide by .018 inch thick, so it covers typical 3/4 inch panel edges with material left for trimming flush.
The SAP description shows material C200138 with EMB LAC, indicating an embossed, lacquered PVC finish that matches panels specified to the same code for coordinated edge appearance.
The SAP description lists 600 FT, so this Rehau PVC edgebanding part 301574-525 provides 600 feet of continuous edge material for extended runs of panels.
Rehau 301574-525 appears under Category Miscellaneous|Edgebanding and Product Class Edge Banding, defining it as PVC edge banding for finishing exposed panel edges.
The .018 inch thickness in the SAP description creates a relatively thin PVC edge, helping faces and edges meet with a subtle transition suitable for tight reveals.
The SAP description lists 15/16 inch width, giving extra coverage beyond 3/4 inch panels so installers can trim back to a clean, flush edge after bonding.
The Rehau PVC edgebanding 301574-525 from Rehau, Inc. combines a 15/16 inch by .018 inch profile, C200138 material, and EMB LAC finish, as described in the SAP entry, to support coordinated, consistent edging on panel projects. The 600 FT length in the SAP description suits shops and installers handling multiple cabinets, fixtures, or furniture parts where a single specification must repeat across many edges. For projects calling for this exact Rehau PVC edgebanding size and finish, this part number aligns edging dimensions and appearance with the intended panel design.
Sold In: 1 Roll