Rehau PVC edgebanding 301574-527 is a PVC edge banding product that caps exposed panel edges so cut boards present a finished, uniform appearance in cabinet and casework builds. The 15/16 inch width covers standard 3/4 inch panels with room for trimming, which helps installers hide slight panel variances while still achieving a tight, flush edge after routing or filing. The .018 inch thickness creates a slim edge profile that blends closely with the panel face, which matters when matching modern flat-panel designs. The PVC material forms a tough edge surface around the substrate, giving fabricators a consistent band that handles everyday shop handling and normal cabinet use. The 600 ft length supports longer production runs or multiple jobs from a single roll, which helps reduce roll changes and keeps edgebanding workflow moving on edgebanders or handheld setup.
The 15/16 inch by .018 inch size of this Rehau PVC edge banding gives installers a predictable band to work with during application. The slight over-width beyond 3/4 inch panel thickness leaves usable trim stock after bonding, which is important when running parts through an edge bander and then flush trimming on both faces. The .018 inch thickness helps tools track cleanly along the edge without creating a heavy shoulder, so cabinet doors and panels align more smoothly in assembled runs. The 600 ft length on this item means one coil serves many linear feet of edging, allowing shops to set up once and continue banding without frequent material changes, which supports steady throughput on production lines or extended project work.
This Rehau PVC edgebanding, identified as 301574-527 and described as 15/16X.018 C300083 EMB LAC 600 FT, serves as edge banding in woodworking and cabinet-related projects handled by Wurth Baer Supply customers. The edge banding format matches typical needs around panel-based construction in shops that rely on sheet goods and need a defined edge finish on verticals, shelves, and fronts. The 15/16 inch width is sized for use around common 3/4 inch materials used in cabinets and casework, so fabricators can run most standard parts with the same band dimension. The PVC edge banding category suits woodworking industry workflows supported by Wurth Baer Supply, aligning with other cabinet hardware, laminates, and related surfacing materials these shops use on a daily basis. With 600 ft provided per roll, this product supports both one-off custom pieces and extended cabinet runs when a single edgebanding match is needed across all visible edges.
The defined 15/16 inch by .018 inch size on the Rehau PVC edgebanding 301574-527 gives shop staff a fixed reference when setting up edge banders or manual trimmers, which reduces adjustments between batches and supports repeatable outcomes from part to part. Because the band is classified as Rehau PVC edge banding, teams can align their adhesive, temperature, and trimming practices around a known PVC profile instead of varying material types, which simplifies standard work in the shop. The specific manufacturer identifier C300083 and part number 301574-527 allow project documentation and cut lists to call out the exact band for repeats or later repairs, which keeps future work visually aligned with the original job. The 600 ft roll length also plays into quality, as long, uninterrupted runs from the same coil keep color and surface appearance consistent along entire banks of cabinets, shelving rows, or panel runs without mid-project material variation.
Rehau PVC edgebanding 301574-527 is described as 15/16X.018, so it provides a 15/16 inch wide band at .018 inch thickness for edging standard panel materials.
The 15/16 inch width extends beyond 3/4 inch panel thickness, allowing extra material for trimming to a flush edge on both faces after the edgebanding is bonded.
The .018 inch thickness produces a slim edge profile, so after trimming, the transition from panel face to edge banding stays subtle and suits flat-panel cabinet designs.
This Rehau PVC edge banding is specified at 600 FT, providing ample length for multiple cabinets or a production run without frequent material changes.
Part number 301574-527 identifies this exact Rehau PVC edgebanding, helping shops match previous projects or document the specific banding used on a job.
The PVC edge banding material provides a consistent man-made surface along panel edges, aligning with other woodworking supplies offered by Wurth Baer Supply.
Rehau PVC edgebanding 301574-527 from Wurth Baer Supply pairs a 15/16 inch width with .018 inch thickness and a 600 ft length, giving shops a defined, repeatable edge banding option for cabinet and panel work. Using this specific Rehau PVC edge banding allows fabricators to match panel edges across multiple pieces with the same size and appearance. Select this 301574-527 edge banding when a consistent PVC edge is required around typical 3/4 inch sheet goods in woodworking or cabinet-focused projects.
Sold In: 1 Roll