Rehau PVC edgebanding 301574-536 is a PVC edge banding that covers raw board edges so panel cores are protected and visually finished on cabinets, furniture, and fixtures. The Rehau brand origin ties this edgebanding directly to a manufacturer focused on engineered edge solutions, which supports consistent performance across long runs of casework. The 15/16 inch width stated in the SAP description gives coverage beyond a standard 3/4 inch panel, which provides working room for trimming flush without exposing the substrate. The .018 inch thickness indicated in the same description defines it as a thin PVC edge, which helps it conform to typical panel tolerances while keeping glue line build-up modest. The 600 ft length called out in the SAP description identifies this as a production-scale roll, which supports extended runs on edgebanders without frequent changeovers or splicing during a job.
The 15/16 inch width noted in the SAP description gives extra coverage beyond common panel thicknesses, which allows a bit of overhang for trimming stations to cut the edge clean without leaving laminate or core proud. The .018 inch thickness specified there characterizes this as a thin PVC option, which helps reduce the step at the edge and can simplify scraping or buffing passes. The PVC material identified in the product name means the banding behaves as a thermoplastic, which fits well with typical edge banding machines and hot-melt processes used in woodworking production. The manufacturer part number 301574-536 anchors this specific width, thickness, and color combination, which helps maintain consistency when repeating parts or extending an existing installation.
The category listing as edgebanding places this Rehau PVC strip in routine cabinet, furniture, and fixture work where raw substrate edges need covering. The 15/16 inch width from the SAP description supports edge treatment on panels around 3/4 inch thick, giving enough overhang for trimming on vertical or contour edges. The PVC construction specified in the product name suits interior woodworking environments, where thermoplastic edging is common on cabinet sides, shelves, and doors. The 600 ft length described in the SAP data makes this roll appropriate for shop environments handling repeated cabinet runs or standardized components, because one roll can service many parts before a reload is needed. The specific manufacturer part number 301574-536 ties the visual and dimensional characteristics of this banding to Rehau documentation, so shops working from cut lists or design specifications can call out the same code across multiple projects.
The 15/16 inch width defined in the SAP description gives a controlled margin over most core materials, letting edge banding machines register reliably while still leaving room for precise trimming without risking edge burn-through. The .018 inch thickness from the same description identifies a relatively thin edge, which can reduce the height of the transition at the face and support a cleaner feel after standard scraping passes. The long 600 ft roll length noted in the SAP description enables extended uptime on automated edgebanders, which helps keep feed rates steady and reduces interruptions that can introduce visible seams between sections. The PVC material highlighted in the product name works with standard hot-melt adhesive systems used in woodworking, which supports predictable bond behavior from part to part and helps maintain uniform edge appearance across a project.
Rehau PVC edgebanding 301574-536 uses a 15/16 inch width, which provides overhang around common panel thicknesses so trimming operations can leave a flush, clean edge on cabinet and furniture work.
The .018 inch thickness noted in the SAP description gives a thin PVC edge, which limits the step at the panel face and supports smooth scraping and profiling on finished components.
The 600 ft length specified in the SAP description supports long production runs, which reduces roll changes on edgebanding machines and keeps cabinet or furniture parts flowing consistently.
Manufacturer part number 301574-536 identifies this exact Rehau PVC edgebanding configuration, which helps repeat the same edge material when matching earlier installations or drawings.
The PVC material referenced in the product name suits standard woodworking edgebanders using hot-melt adhesives, which aligns this banding with common cabinet and fixture production methods.
The edge banding category designation targets use on cabinet, furniture, and fixture edges, where covering exposed board cores improves both appearance and edge protection.
The 15/16 x .018 sizing documented in the SAP description, combined with the 600 ft roll length, positions this Rehau PVC edgebanding for efficient cabinet and furniture production. The specific manufacturer part number 301574-536 keeps ordering aligned with shop drawings and repeat jobs. For woodworking operations that rely on PVC edge treatment, this Rehau edgebanding offers defined dimensions and roll length to support steady throughput on edgebanders and consistent edge appearance across panels.
Sold In: 1 Roll