Rehau PVC edgebanding 301574-600 provides a PVC edge banding solution in the WA D96K-60 Shadow color, giving casework and cabinetry a defined finished edge that matches projects calling for this specific Shadow tone. The 15/16 inch width covers standard panel edges while allowing a bit of overhang for trimming, supporting clean edge definition on typical cabinet or furniture stock. The 018 thickness works as a practical balance between a low-profile edge and visible protection at the panel perimeter, which helps the edge stand up better than a raw board edge in normal shop and install handling. As an edge banding product in the Rehau, Inc. line, this edgebanding fits into workflows that already rely on PVC banding for color-coordinated edges on laminated or finished components.
The SAP description "WA D96K-60 Shadow 15/16X018" spells out the key working dimensions and color family, so shop personnel can pull the correct Rehau PVC edge banding when a cut list specifies this Shadow edge detail. The 15/16X018 sizing tells the operator how the banding will sit on the panel edge, which supports planning for trimming passes and helps align machine settings or hand tools to the actual thickness and overhang. The manufacturer part number 301574-600 gives an unambiguous ID for reordering the same PVC edgebanding, which streamlines repeat jobs or future service work that needs to match original cabinet edges visually.
The WA D96K-60 Shadow designation places this Rehau PVC edgebanding in a specific Shadow color space, which matters when a project calls for a coordinated look between flat surfaces and their edges. Fabricators can assign this 301574-600 part number anywhere exposed panel edges need that Shadow tone, such as cabinet carcasses, shelving runs, or door and drawer fronts that use matching faces. Because the material is 15/16 inch wide, it suits typical panel thicknesses where a slight overhang is preferred for trimming down to a crisp edge, especially on melamine or laminated stock. The PVC construction positions the banding as an edge treatment for wood-based or panel-based assemblies in woodworking environments served by Wurth Baer Supply.
The 15/16X018 dimension in the SAP description provides a predictable format for setting up machines or manual edging processes, since operators know they are working with a 15/16 inch wide, 018 thick strip every time this part is used. That consistent cross-section helps dial in feed, trimming, and finishing steps so edges look uniform across a whole run of cabinets or fixtures that specify this Rehau PVC edge banding. The defined WA D96K-60 Shadow identity also reduces color guesswork on repeat orders, which supports service work where a damaged panel edge needs replacement that lines up with the existing Shadow-colored edges already on site.
Rehau PVC edgebanding 301574-600 serves as edge banding for panel and cabinet components, covering exposed edges so they present a finished Shadow-colored perimeter instead of raw core.
The 15/16X018 sizing indicates a 15/16 inch wide, 018 thick PVC edge banding, giving coverage with enough material for trimming while keeping a relatively slim edge profile on panels.
The WA D96K-60 Shadow color ties this edgebanding to a specific Shadow tone, helping match panel edges to projects that specify this Rehau color for consistent appearance across components.
The Rehau 301574-600 part number uniquely identifies this PVC edge banding, simplifying reorders and ensuring the same Shadow color and 15/16X018 size are used on future work.
The 018 thickness supplies a modest yet protective PVC layer at the edge, keeping the profile neat while reinforcing the panel perimeter against everyday handling in cabinet use.
As an Edge Banding product class item, this strip is dedicated to covering exposed panel edges, helping shops plan separate material lines for edging versus sheet or core materials.
Rehau PVC edgebanding 301574-600 brings together the WA D96K-60 Shadow color and 15/16X018 sizing for projects that need a defined Shadow edge on panel work. By using the exact 301574-600 part number from Wurth Baer Supply, shops align material pulls, color, and dimensions to the same PVC edge banding every time, which supports consistent edging results on cabinet runs, fixtures, and follow-up service work that must match earlier installations.
Sold In: 1 Roll