Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau PVC edgebanding 301574-605 is Rehau, Inc. PVC edge banding designed to finish exposed panel edges, so cabinet and furniture projects get a clean, uniform edge detail that matches the panel layout. The 15/16 inch width covers typical 3/4 inch panels with room for trimming, which helps installers achieve a flush edge without exposing substrate. The .018 inch thickness provides a low-profile edge that sits tight to the panel, which supports a neat finished look along doors, drawer fronts, and casework. This Rehau PVC edgebanding is identified as product class Edge Banding, so it suits projects where raw board edges need a durable finishing strip. The designation C200113 EMB LAC ties this banding to a specific finish code, which helps shops repeat the same appearance across multiple runs and maintain visual consistency from job to job. The 600 FT length supports longer production runs with fewer changeovers.
The 15/16 inch by .018 inch size of this Rehau PVC edgebanding defines how it fits onto panel edges, so installers can match banding dimensions to their equipment setup. The 15/16 inch width provides coverage beyond standard 3/4 inch panel thickness, which allows trimmers to remove slight overhang for a clean, flush finish. The .018 inch thickness keeps the edge profile slim, which supports smooth transitions from face to edge on doors, drawer fronts, and casework components. This defined size helps shops standardize machine settings on edgebanders and trimmers, so they can repeat consistent results when using this same 301574-605 edgebanding across multiple projects.
This Rehau, Inc. PVC edge banding is categorized under Edge Banding, so it aligns with applications where raw sheet-good edges need a finished appearance. Cabinet shops can apply the 15/16 inch width to typical 3/4 inch panels, which suits base cabinets, wall cabinets, and pantry units that present exposed edges. Furniture builders can use the .018 inch thickness on shelves and casegoods, so the finished edge stays slim while still covering the substrate. The C200113 EMB LAC designation ties this 301574-605 banding to a defined finish look, which helps designers coordinate this strip with their chosen panel decor throughout a project. The 600 FT length supports runs where many parts share the same edge detail, which is useful for production jobs that repeat the same material combination.
The specified 15/16 inch width and .018 inch thickness of this Rehau PVC edgebanding give shops predictable geometry, so edgebander setups can be dialed in once and used reliably with the same stock. Having a known width that exceeds 3/4 inch panel thickness provides consistent overhang, which lets trimmers cut back to an even, flush line on doors, drawer fronts, and cabinet sides. The manufacturer part number 301574-605 and C200113 EMB LAC description tie this banding to a repeatable finish and specification, which matters when matching existing installations or extending an established cabinet line. The 600 FT length supports batch processing, so operators can run long sequences of parts without swapping to another coil of edge banding during the same setup.
Rehau PVC edgebanding 301574-605 is PVC edge banding from Rehau, Inc., used to finish exposed panel edges so cabinet and furniture components present a clean, uniform edge.
This Rehau PVC edgebanding is 15/16 inch wide by .018 inch thick, so it covers standard 3/4 inch panels with trim allowance while keeping the edge profile slim.
The 600 FT description indicates a long length that supports extended production runs, so shops can edge many parts with the same setup before changing material.
The C200113 EMB LAC description identifies a specific finish configuration, so designers and shops can match this edgebanding to a chosen decor across projects.
The Edge Banding product class confirms this Rehau PVC edgebanding is intended for covering raw panel edges, which aligns it with cabinet and furniture edge finishing tasks.
Part number 301574-605 uniquely identifies this Rehau PVC edgebanding, so shops can reorder the same material to match previous cabinet or furniture runs.
Rehau PVC edgebanding 301574-605 from Wurth Baer Supply combines a 15/16 inch width, .018 inch thickness, and a defined C200113 EMB LAC finish designation, so it supports consistent, repeatable edge finishing across cabinet and furniture projects. Using this specific 301574-605 part number lets shops align edgebander setups and visual appearance from one job to the next, which is valuable when standardizing a cabinet line or matching existing installations. For woodworking operations that rely on predictable materials, this Rehau PVC edgebanding provides a clearly defined size, finish reference, and 600 FT length to support productive, uniform edge work.
Sold In: 1 Roll