Rehau PVC edgebanding 301574-610 is a PVC edge banding designed to finish exposed panel edges on woodworking projects. The 15/16 inch width covers typical panel thickness with a small overhang, giving room for flush trimming and reducing risk of chip-out along the edge. The .018 inch thickness keeps the edge banding low profile, which supports a crisp finished edge while limiting the transition between the panel face and the banded edge. The C500022 designation identifies the specific PVC formulation and design family, helping shops match this edgebanding to existing work or drawings on repeat jobs. The embossed lacquer surface noted in the description provides a textured, lacquer-style finish that visually upgrades cut panel edges and supports a consistent look across cabinet runs. The 600 foot length supports high-throughput runs before changeover, which is useful for repetitive casework or production batch work.
The 15/16 inch width noted in the description allows edgebanders and manual setups to center this Rehau PVC edge banding on common panel thicknesses while still leaving material to trim, supporting cleaner corners. The .018 inch thickness influences heat and pressure settings during application, as thinner PVC responds quickly, which is useful when dialing in machines for repeatable results. The PVC construction works with typical edgebanding equipment used in woodworking shops, so this material fits into existing workflows where PVC edge banding is already part of the process. The 600 foot length lets operators set up the roll once and run many identical parts, helping keep feed, heat, and trim knives tuned to one material for an extended period.
This Rehau, Inc. PVC edge banding in 15/16 x .018 sizing fits work where exposed board edges need a finished PVC face, such as cabinet sides, shelves, or casework edges. The width noted in the SAP description allows coverage across the full edge of typical sheet goods with some excess, which gives operators room to trim back to a clean line after bonding. The .018 inch thickness works well in jobs where the goal is a refined edge that does not stand proud of the surface, helping doors, drawer fronts, and adjacent panels meet with a controlled gap. Because the product is part of the Rehau PVC edgebanding family, it aligns with workflows already set up around PVC materials, so shops familiar with PVC handling can integrate this banding into runs without changing basic techniques.
The C500022 embossed lacquer detail in the description identifies a specific embossed lacquer-style surface on this PVC, which affects both look and feel at the edge. That textured lacquer character helps visually upgrade raw board edges, so completed cabinets or fixtures present a defined style instead of an unfinished cut edge. Using a consistent C500022 surface along all exposed edges helps maintain the same appearance from cabinet to cabinet, which is important on multi-unit builds where panels sit side by side. The embossed lacquer texture also works with typical trimming and scraping steps used on PVC edge banding, so installers can remove overhang while retaining the intended surface pattern. With the 600 foot length described, larger projects can hold that same C500022 finish across many parts from a single roll, supporting repeatable results from sample through final installation.
Rehau PVC edgebanding 301574-610 is listed at 15/16 inch width and .018 inch thickness, giving coverage for common panel edges while staying thin enough for a low-profile finished edge.
The C500022 embossed lacquer surface provides a textured lacquer-style finish, so panel edges gain a defined look that visually coordinates across cabinets or casework using the same surface.
The 15/16 inch width covers the full edge of typical panels with a small overhang, supporting flush trimming and helping protect the underlying board and face material at the edge.
The .018 inch thickness keeps the PVC edge banding subtle, which helps doors, fronts, and panels align closely without a bulky lip where the edge banding meets the surface.
The 600 foot length lets shops run many parts from a single roll, which supports longer uninterrupted production runs on edgebanders or manual setups.
The Rehau PVC material provides a uniform man-made edge, giving predictable trimming behavior and a consistent finished appearance on repeated cabinet or shelving projects.
The Rehau PVC edgebanding, 301574-610, combines 15/16 inch width, .018 inch thickness, and a C500022 embossed lacquer surface to support controlled, repeatable edge finishes. For cabinet, shelving, or casework runs that call for a consistent PVC look, this 600 foot roll aligns dimensions, surface character, and material into one solution. When the job needs a defined lacquer-style edge on exposed panels, this specific Rehau part number keeps sizing and surface finish tied to a single, traceable product choice.
Sold In: 1 Roll