Rehau PVC edgebanding 301574-669 is a PVC edge banding from Rehau, Inc. that covers and protects raw panel edges, giving casework, cabinets, and fixtures a finished profile that holds up in everyday shop-built projects. The 15/16 inch width matches common 3/4 inch panels with overhang, so you can trim flush for a tight, professional line along doors, shelves, and carcass edges. The .018 inch thickness keeps the edge low profile, which helps panels look uniform while providing a consistent surface for trimming tools. The C600001 EMB LAC designation identifies this specific embossing and lacquer combination, so runs stay visually consistent when you repeat the same material on multiple jobs. A 600 foot length supports longer production runs and repeat use on a job or across several installs without constant reordering or lot changes.
The 15/16 inch by .018 inch format of this Rehau PVC edgebanding works with typical shop edge-banding equipment that handles thin PVC tape, so it integrates into standard workflows without special setup. The width allows a bit of material beyond the face on both sides of 3/4 inch stock, which supports clean trimming passes and tight visual alignment along edges. The thin .018 inch profile helps trimming routers and edge scrapers track cleanly along the face without pronounced steps, which matters when panels sit side by side in built-ins or cabinet banks. The 600 foot length reduces coil changes during edging runs, so once the banding is set up in the machine, work can continue across many parts with the same part number and appearance.
This Rehau PVC edgebanding, part number 301574-669, fits projects built around sheet goods where exposed edges need to be closed with a matching PVC strip. The 15/16 inch width suits common panel builds in cabinets, casework, and general woodworking that rely on 3/4 inch material, giving enough edge coverage to hide the core while leaving room for trimming tools to work. Because it is an edge banding product in PVC, it aligns with applications where a synthetic edge is preferred over raw substrate, helping panels present a uniform face around doors, carcasses, and shelving. The C600001 EMB LAC labeling identifies this exact surface and finish, which supports using the same roll across cabinet runs, matching edges on doors, drawer fronts, and exposed carcass edges under one consistent visual standard.
The defined 15/16 inch by .018 inch size of this Rehau PVC edge banding gives installers predictable behavior during set-up, so edge-banders and trimming stations can be dialed in around a known width and thickness. That repeatability matters when running many panels back to back, because cutters, scrapers, and flush trim passes respond the same way from piece to piece. The PVC construction presents a uniform material to trimming tools, which helps maintain smooth edges and reduces variation along long cabinet sides or tall doors. The 600 foot length ties many parts to a single coil, limiting visual shifts that could appear if multiple different lots were used on a single bank of cabinets. The manufacturer reference C600001 EMB LAC, together with the 301574-669 part number, simplifies reordering when a shop wants future work to match the same embossing and lacquer appearance already in use.
Rehau PVC edgebanding 301574-669 is 15/16 inch wide and .018 inch thick, which lets it cover typical 3/4 inch panel edges with enough overhang for clean trimming and a consistent finished edge.
Rehau 301574-669 edge banding is PVC, so it provides a synthetic edge surface that matches common edge-banding workflows on cabinet, casework, and other panel-based woodworking projects.
The 600 foot length allows longer edging runs from a single coil, keeping color and finish consistent across many parts and reducing changeovers during cabinet or fixture production.
C600001 EMB LAC is part of the SAP description and identifies this specific embossing and lacquer combination, helping match the same visual finish when repeating the part on future jobs.
PVC edgebanding 301574-669 is manufactured by Rehau, Inc., which supplies this edge banding product through distributors such as Wurth Baer Supply for woodworking use.
The .018 inch thickness keeps the banding thin, so trimming tools create a low step at the edge, supporting smooth transitions between face and edge on cabinet doors and panels.
Choose Rehau PVC edgebanding 301574-669 when you need a 15/16 inch by .018 inch PVC edge banding that aligns with typical 3/4 inch panel work. The defined C600001 EMB LAC specification and 600 foot length support consistent-looking cabinet and casework runs while using a single, repeatable part number from Wurth Baer Supply.
Sold In: 1 Roll