Rehau PVC edgebanding 301574-674 is PVC edge banding from Rehau, Inc. that finishes raw panel edges, so cabinet and furniture projects present a consistent look along every exposed side. The edge banding belongs to the Edge Banding product class, so it is designed specifically for covering and protecting sheet-good edges in woodworking and casework assemblies. The SAP description lists a 15/16 x .018 size, which gives a practical working width for standard panel thicknesses while keeping a low profile that blends at the edge. The same description identifies C400811 EMB LAC, indicating an embossed lacquer surface that provides a textured appearance that aligns with decorative surfaces in many shop layouts. The 600FT length in the description offers extended run capacity, so production environments can handle long cabinets or multiple matching pieces without frequent roll changes during processing.
The SAP description lists this Rehau PVC edgebanding as 15/16 x .018, giving installers a band wide enough to cover the face of typical casework panels while still trimming quickly at the router or edgebander. That same description calls out C400811 EMB LAC, which signals an embossed lacquer surface that interacts predictably with standard woodworking tools because it is specified as PVC edgebanding. The 600FT reference defines a long, continuous length that supports repeated passes through automatic edgebanding machines or manual application workflows on multiple cabinets in the same job, keeping the visual and dimensional result consistent from the first edge to the last.
This product is identified as Rehau PVC edgebanding with a 15/16 x .018 size, so it is oriented toward edging sheet materials used in cabinets, casework, and similar woodworking builds. The width called out in the SAP description gives coverage for exposed panel edges while leaving only modest overhang, which supports efficient trimming operations after bonding. Because it is classified under Edge Banding and described as PVC edgebanding, it fits directly into typical edgebanding workflows on shop equipment set up for thermoplastic edging, helping maintain a familiar process for operators. The C400811 EMB LAC designation links this roll to a specific embossed lacquer appearance, allowing shops that standardize on that look to carry the same aesthetic through across doors, drawer fronts, and cabinet sides in one coordinated project.
The 600FT length in the SAP description means the Rehau PVC edgebanding roll supports long production runs, which keeps color and texture consistent across an entire bank of cabinets because the material comes from one continuous length. The narrow .018 thickness supports clean trimming and corner detailing when used with edging tools set to typical PVC parameters, so installers can dial in settings and run multiple parts without constant adjustment. The C400811 EMB LAC note identifies a defined embossed lacquer finish, which helps maintain a uniform surface reflection along each edge, so seams between panels are visually aligned. The Manufacturer Part # 301574-674 ties all of these characteristics together under a single reference, simplifying repeat orders when matching prior installations or extending an existing millwork program.
The Rehau PVC edgebanding 301574-674 is identified in the SAP description as 15/16 x .018, giving a band sized for standard panel edges with a trim-friendly thickness.
The C400811 EMB LAC detail in the SAP description indicates an embossed lacquer surface, so the edging presents a textured appearance that coordinates with similar decorative finishes.
The SAP description lists 600FT, providing a long continuous length that supports extended edgebanding runs on multiple cabinets or casework components.
The product is described as Rehau PVC edgebanding, so it is a PVC edge banding suited to woodworking shops that process thermoplastic edging on standard machines.
The 15/16 width gives coverage across common panel thicknesses while leaving limited excess, which supports faster trimming and cleaner finished cabinet edges.
The Manufacturer Part 301574-674 uniquely identifies this Rehau PVC edgebanding color and finish, helping shops reorder the same edging when extending existing work.
This Rehau PVC edgebanding, identified as 301574-674, combines a 15/16 x .018 size with a C400811 EMB LAC embossed lacquer finish, giving shops a defined edging for panel work. The 600FT length in the SAP description supports sustained runs on cabinet or casework projects without interrupting setups, which keeps appearance and workflow steady across a full job. For woodworking operations that rely on repeatable results and precise color and texture matching, the clearly defined dimensions, finish code, and Manufacturer Part # provide a straightforward way to specify and apply the same edging on current and future projects.
Sold In: 1 Roll