Rehau PVC edgebanding 301574-675 is a PVC edge banding that covers and protects exposed panel edges, giving cabinets and casework a finished look that matches the sheet surface. The product class listed as edge banding defines it as a trim material for the raw edge of panels, so it creates a uniform visual line where core material would otherwise show. The 15/16 inch width noted in the SAP description 15/16X.018 C700204 EMB LAC 600FT provides full coverage over standard 3/4 inch panel edges with a small overhang for flush trimming. The .018 thickness in that same description indicates a thin PVC profile, which helps cut cleanly and route quickly during installation. The 600FT reference specifies a long production-length coil, supporting jobs that require continuous runs and reducing coil changes on repetitive cabinet or furniture parts.
The SAP description 15/16X.018 C700204 EMB LAC 600FT confirms a 15/16 inch by .018 inch PVC profile supplied in a 600 foot coil, which supports straightforward edge application across a variety of panel sizes. The 15/16 inch width gives installers a little extra material beyond 3/4 inch panel thickness, helping trimming tools create a crisp, flush edge in one pass. The thin .018 construction reduces the amount of material being routed away, which helps maintain control along curved or straight runs. The long 600 foot coil format supports repetitive work on cabinet runs or casework, letting the same color and material carry across many pieces for visual continuity.
The product name Rehau PVC Edgebanding, 301574-675 identifies this material as PVC edge banding suited to covering exposed edges on cabinets, furniture, and other panel-based assemblies. The product class listing as edge banding confirms that its primary role is finishing the sides of laminated or veneered boards, so it fits projects where the core should stay concealed. The 15/16 inch width noted in the SAP description 15/16X.018 C700204 EMB LAC 600FT aligns with common cabinet and casework built from 3/4 inch stock, which allows this coil to serve as a general solution across many carcass and shelf parts. Because the coil length is documented as 600FT, it supports shop environments producing repeated parts, such as kitchen runs, office furniture, or commercial fixtures, where staying on one color and material across many components matters for a consistent outcome.
The PVC designation in the product name Rehau PVC Edgebanding, 301574-675 signals a plastic composition, which works with standard edge banding equipment that handles thin PVC tapes, helping installers keep workflows aligned with other PVC projects. The .018 thickness in the SAP description 15/16X.018 C700204 EMB LAC 600FT gives a slim edge profile, so trimming and scraping remove only a small amount of material and help maintain a smooth transition at the edge. The 15/16 inch width in that same description offers some overhang on 3/4 inch panels, which allows the band to be centered, bonded, and then trimmed back to a clean, even edge without exposing the panel core. The 600FT coil length described there supports longer uninterrupted runs on edge banding machines, which can reduce downtime for coil changes and help keep part-to-part appearance uniform throughout an entire job.
Rehau PVC Edgebanding 301574-675 is classified as edge banding, so it is used to finish and protect exposed panel edges on cabinets, furniture, and other panel-based constructions.
The SAP description 15/16X.018 C700204 EMB LAC 600FT states a size of 15/16 inch wide by .018 inch thick, giving coverage and a slim profile for trimming operations.
The SAP description lists 600FT, so the coil length supports extended production runs and repeatable edging across multiple cabinet or furniture components.
The product name Rehau PVC Edgebanding, 301574-675 identifies the material as PVC, which works with standard PVC edge banding machinery and trimming tools.
The edge banding product class indicates use on exposed panel edges, so it suits cabinet boxes, shelving, and other furniture panels that need a finished edge.
The 15/16 inch width covers 3/4 inch panel edges with extra material, giving room for trimming to a flush, clean edge without exposing core material.
The product name Rehau PVC Edgebanding, 301574-675 and the SAP description 15/16X.018 C700204 EMB LAC 600FT define a PVC edge banding sized for common 3/4 inch panels and supplied in a 600 foot coil, which suits ongoing cabinet or furniture production. The .018 thickness noted there supports fast trimming and smooth edge transitions, while the edge banding product class confirms its use on exposed panel sides. For projects that rely on continuous, matching edges across many parts, this specific combination of width, thickness, and coil length helps maintain consistent results from piece to piece.
Sold In: 1 Roll